|
Custom Performance Engineering (cp-e.com) cp-e™ has been a front runner in pushing the L3-VDT engine since its inception; offering a solution for all your needs. Our motto is serious performance from serious engineering. Everything we do is a sentiment to this motto; from rigorous R&D, designing everything in a 3D software environment, to providing you with a Made in the U.S.A product paired with a lifetime warranty. cp-e™ tries to give you the best product available on the market through constantly engineering new products and re-engineering old products. We continue to push the L3-VDT, and are proud to say that 52% of our whole product line-up is for Mazda vehicles! When you are serious about performance, contact the company that is serious about engineering! www.cp-e.com |
Welcome to Mazdaspeed ForumsMazda Forums / MazdaSpeed Forums - Mazdaspeed Forum with High Performance Discussions, Car Gallery, Mods Information, Street Racing Stats,Street Racing Videos & more. The Archived MazdaspeedForums! Mazdaspeed Mazda MSF MazdaSpeedForums.org. You are currently viewing our boards in read mode only. We are here to preserve the data and info that is useful to Mazda gear heads. If you'd like to donate to keep this info alive, your donation will go to hosting, SSL, and domain fees. | |
Search Forum |
| LinkBack | Thread Tools | Search this Thread | Display Modes |
|
04-26-2012, 03:24 PM | #1 |
Approved MSF Vendor Join Date: May 2008 Location: Beltsville, Maryland
Posts: 1,728
(View Stats)
iTrader: (0)
Rep Power: 2499 Thanks: 425
Thanked 4,675 Times in 997 Posts
Groans: 10
Groaned at 115 Times in 51 Posts
(Thread Starter) | Not Ranked : 0 score cp-e Product Support Specialist Needed RESPONSIBILITIES: * Answering Phones * Take Customer Orders * Sell used parts and spare parts on e-bay * Answer Support Questions via phone, email, forums etc * Assisting in product write-ups, directions and documenting project cars. * Assist in locating R&D cars Skills Needed: * Good communication skills * Highly Organized *Attention to Detail * Ability to work in a fast paced environment * Ability to complete tasks on your own as well as in a group and on time * Ability to take direction, criticism, from others * Ability to prioritize tasks * Ability to work on weekdays and the occasional weekend (when necessary to meet deadlines) * Friendly personality * The ability to distinguish between parts on shelf * Extensive knowledge of turbo-charged vehicles MUST HAVE OWN TRANSPORTATION This is an onsite position. No Telecommuting. This position is in Beltsville, MD This is a Full Time position with growth potential info@cp-e.com To apply please email your resume to the address above.
__________________ Website: www.cp-e.com Facebook: www.facebook.com/gocpe Twitter: www.twitter.com/gocpe |
The Following 18 Users Say Thank You to www.cp-e.com For This Useful Post: | 08.5MS3 (04-27-2012), Adam is so pro (05-09-2012), ant_wailes (04-26-2012), Awesomesauce (05-09-2012), BigJimMs3 (04-26-2012), doubleflusher (04-26-2012), G26 (04-27-2012), kritz (05-09-2012), mason (05-01-2012), MS3-a(sore)ASS-rex (04-26-2012), rfinkle2 (05-09-2012), Sacrilicious (04-26-2012), SilverDemon (04-26-2012), superskaterxes (04-26-2012), thehead (04-30-2012), TriO (04-26-2012), uncorked11 (04-27-2012), warlord (05-09-2012) |
04-26-2012, 03:29 PM | #2 |
Must Have Teh 10's! Join Date: Mar 2008 Location: Columbia, MD
Posts: 10,442
(View Stats)
iTrader: (9)
Rep Power: 10778 Thanks: 6,334
Thanked 21,014 Times in 5,264 Posts
Groans: 101
Groaned at 138 Times in 95 Posts
| Not Ranked : 0 score props for picking up the single most important thing you guys lost since jake left. one note, this is the single most important job you have at CPE because it represents who you are and your CS skills as a company so dont fuck it up and pick someone like randy. ill take another jordan/jake any day though. just food for thought...........
__________________ 2006 Mazdaspeed 6 GT Black Mica #4126 KILLAH Built/SPEED PERF6RMANC3 (SP) 10.6:1 Pistons ~ SP 11mm H11 Head Studs ~ K1 rods ~ SP CNC Head Work ~ Crower 65lb Valve Springs ~ Fully Keyed/Pinned Motor ~ GTX35R w/Tial .82AR Hotside ~ JMF IM w/1000cc PI Injectors ~ SP 75mm TB ~ SP In-Tank FP w/Dual DW300's ~ AEM FPR ~ SP Custom PI Fuel kit ~ CPE 4" MAF ~ CPE SAFEseals ~ TR1035 FMIC ~ CPE Atmosphere DP/Ex Manifold/Oil/Water Lines ~ Tial MV-R EWG VTA'd ~ Denso ITV-24's ~ CPE Dual CBE ~ CPE BT TIP ~ CPE RMM ~ JBR TMM ~ JBR PMM ~ TTFMM ~ CPE RDM ~ Sonic Tuning CO's ~ LED Tails ~ Sonic Tuning HID's ~ Whiteline RSB ~ ACT 6 Puck w/unicorn dust First K04 in the 12's First MS6 in the 11's Certified RichTune E-Tuner |
The Following 8 Users Say Thank You to superskaterxes For This Useful Post: | 08.5MS3 (04-27-2012), doubleflusher (04-26-2012), kritz (05-09-2012), MS3-a(sore)ASS-rex (04-26-2012), NJSPEED3 (05-09-2012), Raider (05-09-2012), rfinkle2 (05-09-2012), trf5000 (04-27-2012) |
04-26-2012, 03:33 PM | #3 |
Approved MSF Vendor Join Date: May 2008 Location: Beltsville, Maryland
Posts: 1,728
(View Stats)
iTrader: (0)
Rep Power: 2499 Thanks: 425
Thanked 4,675 Times in 997 Posts
Groans: 10
Groaned at 115 Times in 51 Posts
(Thread Starter) | Not Ranked : 0 score
__________________ Website: www.cp-e.com Facebook: www.facebook.com/gocpe Twitter: www.twitter.com/gocpe | |
The Following 4 Users Say Thank You to www.cp-e.com For This Useful Post: |
04-26-2012, 03:39 PM | #4 |
Join Date: Nov 2011 Location: Corona, CA
Posts: 1,123
(View Stats)
iTrader: (2)
Rep Power: 0 Thanks: 220
Thanked 1,083 Times in 494 Posts
Groans: 23
Groaned at 11 Times in 11 Posts
| Not Ranked : 0 score Post resumes of potential candidates and we will give you feedback.
__________________ 2012 mazdaspeed 3, black mica w/ tech package, AFE drop in dry filter, Autotech internals and CS rmm inserts. . |
04-26-2012, 03:41 PM | #5 |
Join Date: Nov 2010
Posts: 1,455
(View Stats)
iTrader: (1)
Rep Power: 394 Thanks: 2,114
Thanked 547 Times in 307 Posts
Groans: 52
Groaned at 145 Times in 38 Posts
| Not Ranked : 0 score I like better this one.......
Hopefully this will lead to more robust products and customers could gain the lost faith back to CP-e Welcome back to the forum !
__________________ 2010 MazdaSpeed3 Velocity Red: Forge BPV V2, CP-e [HPFP, TMIC, Driver + passenger Mount, 75-A], CorkSport [RSB, Coilover, camber plate], SPC rear camber arm, JBR SSP stg2 + heavy knob, Cobb [ SRI, AP ], HTP 3.5" TIP, - STG2 PERM tuned by DJ, Ultimate Racing TBE (Metal core DP). Aeroforce dual guages, Hankook R-S3 on stock wheels, Sparco Evo2 race seat. ARP long wheel studs -- 17x9 ET 45+ Kosei K1 TS on 255/40/17 on Dunlop Direzza ZII. Pending install: JB EGR block plate Next mod:CorkSport[ Front + Rear swaybar endlinks ], OCC, brake upgrade (CorkSport or BBK), 6 point Harness. 2007 CX-7 GT AWD: CPE CAI, ETS 3" TMIC, JB EGR block plate ,Matt's OCC, AutoExec Strut tower bar, AutoExec lower arm bar, Nittos 420 tires, 12" JBL subwoofer with Bose system. | |
The Following User Says Thank You to bertrand_CX_7 For This Useful Post: | kritz (05-09-2012) |
04-26-2012, 03:55 PM | #6 |
Join Date: Aug 2008 Location: Orange County NY
Posts: 1,839
(View Stats)
iTrader: (0)
Rep Power: 2267 Thanks: 1,484
Thanked 4,131 Times in 1,176 Posts
Groans: 5
Groaned at 11 Times in 4 Posts
| Not Ranked : 0 score
__________________ cp-e-FMIC/cp-e-HPFP/cp-e-Xcel Nano Intake/cp-e-Nviscid TIP/cp-e-BOV Kit/cp-e-Stage2 RMM/cp-e-xFlex Passanger & Driver Motor Mounts/cp-e-catted DP/cp-e-Nexus cat-back exhaust/cp-e-tow plate/cp-e-Tripple Gauge Pod/Rally Armor-Mud Flaps/TWM-Base Bushings/TWM-Shift Weight/Street Unit-Washer Fluid Cap/Street Unit-Oil Cap/Konig-Milligram/Corksport-Rear Sway Bar/Corksport-Aluminum Skidplate/StopTech-Sport Brake Kit/GTSpec-rear v-brace/GTSpec-link reinforecement panel/GTSpec-rear lower tie bar/GTSpec-4 points ladder brace/Lamin-x-Headlight film/Lamin-x-Taillight film/TWM-Full replacement shifter/TWM-Big Type R knob & Hybrid Knob/TWM-Shift boot/3M-1080 Matte Dark Grey Wrap/3M-1080 Brushed Steel Wrap/Tial-BPV/DG Motorsports-CF front lip/DG Motorsports-CF Rear wing extention/Sonic Tuning-Coilovers/COBB Tuning-AccessPort/ | |
The Following User Says Thank You to Grumpyjap For This Useful Post: | Adam is so pro (05-09-2012) |
The Following 2 Users Say NO Thank You to Grumpyjap For This Un-useful Post: | bertrand_CX_7 (04-26-2012), Monotonous ONE (05-02-2012) |
04-26-2012, 03:48 PM | #7 |
Join Date: Aug 2009 Location: Trevose, PA
Posts: 7,012
(View Stats)
iTrader: (1)
Rep Power: 7488 Thanks: 18,940
Thanked 14,559 Times in 4,052 Posts
Groans: 224
Groaned at 80 Times in 67 Posts
| Not Ranked : 0 score If I lived closer I would be all over this. Since I'm not, good luck!
__________________ MS3 has been retired to daily duty Project 1G; 1991 Eagle Talon TSi. 63MM Borg Warner Powered, Corn-Fed, 2.4L Long Rod Monster Under Construction Stock Turbo-Stock Engine Grand Champion of the World! 501WHP & 569WTQ (PERM Tuned, 93 OCTANE PUMP GAS K04 W/N2O!!) NATOR PA |
04-26-2012, 03:57 PM | #8 |
Join Date: Mar 2008 Location: Kirkland, WA
Posts: 1,371
(View Stats)
iTrader: (12)
Rep Power: 0 Thanks: 342
Thanked 1,074 Times in 347 Posts
Groans: 87
Groaned at 25 Times in 18 Posts
| Not Ranked : 0 score Wish I lived closer! |
04-26-2012, 04:01 PM | #9 |
Join Date: May 2008
Posts: 157
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 15
Thanked 87 Times in 31 Posts
Groans: 18
Groaned at 33 Times in 17 Posts
| Not Ranked : 0 score Man I would so love to apply for this job especially since I just lost my job almost two weeks ago. Too bad I don't live closer. Oh well. Good luck to who ever gets this awesome position. |
04-26-2012, 06:21 PM | #10 |
Join Date: May 2009 Location: Chicago, IL
Posts: 6,665
(View Stats)
iTrader: (1)
Rep Power: 10249 Thanks: 14,116
Thanked 19,668 Times in 5,045 Posts
Groans: 136
Groaned at 47 Times in 41 Posts
| Not Ranked : 0 score Pay? Tapadatass
__________________ |
04-27-2012, 09:40 AM | #11 |
Approved MSF Vendor Join Date: May 2008 Location: Beltsville, Maryland
Posts: 1,728
(View Stats)
iTrader: (0)
Rep Power: 2499 Thanks: 425
Thanked 4,675 Times in 997 Posts
Groans: 10
Groaned at 115 Times in 51 Posts
(Thread Starter) | Not Ranked : 0 score
if you're serious please send us your resume and then we can discuss pay. Well, that and if you're willing to relocate.
__________________ Website: www.cp-e.com Facebook: www.facebook.com/gocpe Twitter: www.twitter.com/gocpe | |
The Following User Says Thank You to www.cp-e.com For This Useful Post: | Broxer (04-27-2012) |
04-27-2012, 09:45 AM | #12 |
Join Date: Feb 2012 Location: Quantico, VA
Posts: 2,595
(View Stats)
iTrader: (9)
Rep Power: 0 Thanks: 2,434
Thanked 3,474 Times in 1,262 Posts
Groans: 3
Groaned at 33 Times in 24 Posts
| Not Ranked : 0 score So jelly.....
__________________ [SIGPIC][/SIGPIC] 2013 Scion FR-S (Whiteout) GunMetal 16x8+25 Enkei CompE_Cusco OCC_ Kartboy Crank Pulley_Kartboy TMM insert_Koni Yellows_RCE Springs_K&N Drop-In_Eibach FSB_J2 Catless FP_WhiteLine Camber Bolts_Nameless Race Pipe_RBF600_Ferodo DS2500_PTUNING Tuned Less parking more racing |
04-27-2012, 09:53 AM | #13 |
Join Date: Mar 2010 Location: Lewistown, PA (State College)
Posts: 2,290
(View Stats)
iTrader: (4)
Rep Power: 1938 Thanks: 3,144
Thanked 3,578 Times in 1,432 Posts
Groans: 16
Groaned at 10 Times in 10 Posts
| Not Ranked : 0 score This is great to read. I love your hard parts and I am glad to see your putting an increased focus on customer service.
__________________ 2010 MS3 - Sold 2015 CX-5 GT AWD - Current |
The Following 4 Users Say Thank You to trf5000 For This Useful Post: |
04-30-2012, 06:20 PM | #14 |
Join Date: Oct 2011 Location: Long Island, NY
Posts: 58
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 16
Thanked 40 Times in 19 Posts
Groans: 3
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score I'd relocate for this... Hmmm, I should polish up the old resume me thinks...
__________________ 2012 Mazdaspeed 3 - Tech - Liquid Silver - CorkSport SRI/TIP - Autotech Internals - Cobb AP - JBR AP Mount - CorkSport Interior Light Kit - SURE Street RMM - Cobb Shift Knob - Denso ITV22S Plugs - SURE Oil Rig - ETS 3.5" TMIC - SURE Boost Tubes - TiAL QR BPV - ATP Catless Downpipe - HKS Legamax Exhaust - Stratified Tune in progress |
05-02-2012, 04:01 PM | #15 |
Approved MSF Vendor Join Date: May 2008 Location: Beltsville, Maryland
Posts: 1,728
(View Stats)
iTrader: (0)
Rep Power: 2499 Thanks: 425
Thanked 4,675 Times in 997 Posts
Groans: 10
Groaned at 115 Times in 51 Posts
(Thread Starter) | Not Ranked : 0 score We've had a great response for this position. Thanks for the support guys.
__________________ Website: www.cp-e.com Facebook: www.facebook.com/gocpe Twitter: www.twitter.com/gocpe |
The Following User Says Thank You to www.cp-e.com For This Useful Post: | rfinkle2 (05-09-2012) |
05-09-2012, 05:46 AM | #16 |
Join Date: Jun 2011 Location: Laurel, Maryland
Posts: 3,040
(View Stats)
iTrader: (3)
Rep Power: 3780 Thanks: 8,647
Thanked 7,251 Times in 1,971 Posts
Groans: 493
Groaned at 92 Times in 63 Posts
| Not Ranked : 0 score If i werent in the Army i would be interested in this, want someone to work nights or weekends?
__________________ //KILLAH BUILT, SPEED PERF6RMANC3, TUNED BY THE SUPERSKATER// 700HP CLUB Former World Record Mazdaspeed 60' 1.603 11.479@124mph 10second car with an 11second driver #DIX -Builds 700hp MS6, buys miata, sells said MS6! |
05-09-2012, 05:51 AM | #17 |
Join Date: May 2008 Location: Stamford, CT
Posts: 410
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 243
Thanked 267 Times in 150 Posts
Groans: 26
Groaned at 27 Times in 15 Posts
| Not Ranked : 0 score I think Jordan said he move back from cali for this.
__________________ |
05-09-2012, 06:55 AM | #18 |
Join Date: Nov 2010 Location: Lido Beach,NY
Posts: 7,290
(View Stats)
iTrader: (1)
Rep Power: 8624 Thanks: 17,845
Thanked 16,792 Times in 4,852 Posts
Groans: 95
Groaned at 48 Times in 40 Posts
| Not Ranked : 0 score “I've learned that people will forget what you said, people will forget what you did, but people will never forget how you made them feel.” ― Maya Angelou Great stuff, change does come from the top down. Thanks for really taking interest in this platform, no matter how 'bitchy' we are.
__________________ Nator is what it does. |
05-09-2012, 07:01 AM | #19 |
Join Date: Nov 2010 Location: Mullica Hill, NJ 08062
Posts: 14,536
(View Stats)
iTrader: (13)
Rep Power: 0 Thanks: 52,496
Thanked 33,220 Times in 10,051 Posts
Groans: 298
Groaned at 292 Times in 196 Posts
| Not Ranked : 0 score This is excellent news. Thanks for the continuing interest in out platform. |
The Following User Says Thank You to rfinkle2 For This Useful Post: | kritz (05-09-2012) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Product Release! ? CorkSport Adds Mazdaspeed 6 Rear Sway Bar to Product Line-Up | CorkSport | CorkSport | 47 | 04-22-2014 11:53 PM |
Subaru appoints sales specialist as new global president | Haltech | Automotive News | 0 | 05-10-2011 08:50 AM |
Mazda promotes financial specialist Koga as new No. 2 exec in N.A. | Haltech | Automotive News | 0 | 03-25-2011 10:10 PM |
Do you support PTPerformance? | ptperformance | Mazdaspeed3/6 General Discussion | 13 | 04-29-2010 09:55 PM |
UK specialist looking to give TVR Tuscan a second life as Chevy-powered Titan | Haltech | Automotive News | 0 | 04-16-2010 02:50 PM |