|
Custom Performance Engineering (cp-e.com) cp-e™ has been a front runner in pushing the L3-VDT engine since its inception; offering a solution for all your needs. Our motto is serious performance from serious engineering. Everything we do is a sentiment to this motto; from rigorous R&D, designing everything in a 3D software environment, to providing you with a Made in the U.S.A product paired with a lifetime warranty. cp-e™ tries to give you the best product available on the market through constantly engineering new products and re-engineering old products. We continue to push the L3-VDT, and are proud to say that 52% of our whole product line-up is for Mazda vehicles! When you are serious about performance, contact the company that is serious about engineering! www.cp-e.com |
Welcome to Mazdaspeed ForumsMazda Forums / MazdaSpeed Forums - Mazdaspeed Forum with High Performance Discussions, Car Gallery, Mods Information, Street Racing Stats,Street Racing Videos & more. The Archived MazdaspeedForums! Mazdaspeed Mazda MSF MazdaSpeedForums.org. You are currently viewing our boards in read mode only. We are here to preserve the data and info that is useful to Mazda gear heads. If you'd like to donate to keep this info alive, your donation will go to hosting, SSL, and domain fees. | |
Search Forum |
| LinkBack | Thread Tools | Search this Thread | Display Modes |
10-12-2014, 10:44 AM | #1 |
Join Date: Aug 2013 Location: Bartlesville, OK
Posts: 281
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 195
Thanked 242 Times in 121 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
(Thread Starter) | Not Ranked : 0 score MS3 Catted DP warranty Just sent out my catted DP for warranty work back to CPe. The converter broke up and pieces of it are missing. They should get it this Thursday according to UPS tracking. Was promised a max 2 day turn around. Crossing my fingers as I need the car for Auto X the following weekend.
__________________ 2013 MS3 Velocity Red - FLOW Tuned 25% E85 Mods - GTX2867R Turbo, Snow Meth Kit, Forged Manley Platinum pistons and Rods, Matt Dammond Balance Shaft Delete, Southbend Stage 3 Clutch, SPerformance Aux Fan Controller, 4" HTP Intake, Greddy FV BOV, Stratified Guardian Angel V2, Cobb AP V3, Tanabe Strut Tower Brace, Magna-flow CBE, HPFP Autotech Internals, CorkSport Shifter Bushings, CorkSport short throw shifter, CP-e Stage 2 RMM, CP-e Catless Downpipe, QTP Electric Exhaust Cutoff, NGK one step colder plugs, Cobb 3-port EBCS, Whiteline FSB, EBC 3GD Slotted Rotors, Hawk HPS Brake Pads, Goodridge Stainless Steel Brake Lines, HTP Small Battery Box, 51R Optima Yellow, SPC adjustable Rear Camber Arms, KW Variant 3 Coilover setup, Matt Dammond Passenger and Transmission mounts, Falken Azenis tires (street use), Defi Boost Gauge, AEM UEGO Wideband Gauge, AEM Water Temperature Gauge, AEM Oil pressure gauge, Corksport Short Shifter, Apexi Turbo Timer, Corksport Skid Plate, Threadstone TR8 core and crash bar, DOCRACE exhaust manifold, Reletnless Customs Ported IM, JBR 250 Competition Rear Sway Bar, Kuhmo V710 on RX8 wheels (track use), Matt Dammond OCC (VC and intake), Speed Performance Vented Oil Cap, Rice - 20% tint, Morimoto HID kit, Retrofit High Beams, Morimoto projector clear lenses, Corksport Hood Strut Kit, Corksport eyelids color matched, Ebay rear spoiler extension, Morimoto RGB Halos, LED Red Evil Eye, VG Shark Fin Antenna, Coil Cover, Blue Vacuum Hoses, Morimoto LED low beams, Cover King custom Seat Covers |
10-12-2014, 10:53 AM | #2 |
Join Date: Feb 2012 Location: Atlanta, GA
Posts: 7,680
(View Stats)
iTrader: (28)
Rep Power: 5063 Thanks: 11,719
Thanked 9,782 Times in 3,856 Posts
Groans: 17
Groaned at 32 Times in 22 Posts
| Not Ranked : 0 score
__________________ 2006 Mazdaspeed6 EFR 7163|FMIC|South Bend|FCM coilovers|Powerbrake BBK|RPF1 18x10.5|Nitto NT01 stripped|caged|freektuned 2017 Subaru BRZ MCS TT1 coilovers|Brembo BBK|6UL 17x9|RE-71R|ACE 350|flex fuel|Delicious tuned |
10-12-2014, 11:29 AM | #3 |
Join Date: Dec 2011 Location: Red Deer,AB Canada
Posts: 3,279
(View Stats)
iTrader: (6)
Rep Power: 0 Thanks: 4,855
Thanked 4,338 Times in 1,621 Posts
Groans: 189
Groaned at 64 Times in 21 Posts
| Not Ranked : 0 score Meat Loaf?! Is that you?
__________________ 2010 Mazdaspeed 3 Black Mica w/ Tech Package - Traded In 2014 Ford F150 FX4 Ecoboost - Current |
10-12-2014, 12:10 PM | #4 |
Join Date: May 2013 Location: CO
Posts: 3,853
(View Stats)
iTrader: (7)
Rep Power: 2407 Thanks: 4,487
Thanked 4,600 Times in 2,025 Posts
Groans: 98
Groaned at 296 Times in 73 Posts
| Not Ranked : 0 score Mom, where's my meat loaf! |
10-12-2014, 12:16 PM | #5 |
Join Date: Feb 2012 Location: Atlanta, GA
Posts: 7,680
(View Stats)
iTrader: (28)
Rep Power: 5063 Thanks: 11,719
Thanked 9,782 Times in 3,856 Posts
Groans: 17
Groaned at 32 Times in 22 Posts
| Not Ranked : 0 score No, but I am under PapaBear on musclehunks.com, pm me for a good time.
__________________ 2006 Mazdaspeed6 EFR 7163|FMIC|South Bend|FCM coilovers|Powerbrake BBK|RPF1 18x10.5|Nitto NT01 stripped|caged|freektuned 2017 Subaru BRZ MCS TT1 coilovers|Brembo BBK|6UL 17x9|RE-71R|ACE 350|flex fuel|Delicious tuned |
10-12-2014, 12:40 PM | #6 |
Join Date: Jul 2013 Location: Westchester, IL
Posts: 5,772
(View Stats)
iTrader: (0)
Rep Power: 4924 Thanks: 14,635
Thanked 9,203 Times in 3,608 Posts
Groans: 430
Groaned at 247 Times in 83 Posts
| Not Ranked : 0 score fucking cats missing pieces. i'm missing cats for this reason.
__________________ 2013 MS3 Black Mica SLUGGISH RUGGISH BONE SLUNTWORKS SPEEDSHOP |
The Following User Says Thank You to WetzMS3 For This Useful Post: | Zoom66 (10-12-2014) |
10-12-2014, 02:30 PM | #7 |
Join Date: Jun 2008 Location: Tucson, AZ
Posts: 1,062
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 752
Thanked 734 Times in 418 Posts
Groans: 1
Groaned at 9 Times in 7 Posts
| Not Ranked : 0 score Inb4notunderwarranty
__________________ Wiseco OTS pistons, Eagle Rods, ARP mainstuds, JBR BSD w/ baffle,GT2871R, 51R battery, JBR V1 3.5 aluminum widepath, CP-e Catted DP, custom 3in cat-back, Treadstone TR8L core w/ COBB piping, Damond OCC, HKS SSQV3 (full VTA), autotech HPFP internals, Self tune 33% E85, Grimmspeed EBCS (3port), JBR TM & PM, TRZ Rmm, COBB short shifter, COBB Front/Rear swaybars, Koni STR.T struts, AXIS Circuits 18x8.5 45offset **Old Motor** Best 1/4 -13.19 Stock Turbo/ street tires Best trap speed - 112mph **New Motor** Best 1/4 - 13.35 Stock turbo/ street tires Best trap speed - 112.5 |
10-13-2014, 10:33 PM | #8 |
Join Date: Jul 2014
Posts: 103
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 31
Thanked 95 Times in 54 Posts
Groans: 2
Groaned at 9 Times in 8 Posts
| Not Ranked : 0 score
__________________ "This is your life. And it's ending one minute at a time." | |
10-14-2014, 05:48 AM | #9 |
Join Date: Aug 2013 Location: Bartlesville, OK
Posts: 281
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 195
Thanked 242 Times in 121 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
(Thread Starter) | Not Ranked : 0 score You are killing me. Lol
__________________ 2013 MS3 Velocity Red - FLOW Tuned 25% E85 Mods - GTX2867R Turbo, Snow Meth Kit, Forged Manley Platinum pistons and Rods, Matt Dammond Balance Shaft Delete, Southbend Stage 3 Clutch, SPerformance Aux Fan Controller, 4" HTP Intake, Greddy FV BOV, Stratified Guardian Angel V2, Cobb AP V3, Tanabe Strut Tower Brace, Magna-flow CBE, HPFP Autotech Internals, CorkSport Shifter Bushings, CorkSport short throw shifter, CP-e Stage 2 RMM, CP-e Catless Downpipe, QTP Electric Exhaust Cutoff, NGK one step colder plugs, Cobb 3-port EBCS, Whiteline FSB, EBC 3GD Slotted Rotors, Hawk HPS Brake Pads, Goodridge Stainless Steel Brake Lines, HTP Small Battery Box, 51R Optima Yellow, SPC adjustable Rear Camber Arms, KW Variant 3 Coilover setup, Matt Dammond Passenger and Transmission mounts, Falken Azenis tires (street use), Defi Boost Gauge, AEM UEGO Wideband Gauge, AEM Water Temperature Gauge, AEM Oil pressure gauge, Corksport Short Shifter, Apexi Turbo Timer, Corksport Skid Plate, Threadstone TR8 core and crash bar, DOCRACE exhaust manifold, Reletnless Customs Ported IM, JBR 250 Competition Rear Sway Bar, Kuhmo V710 on RX8 wheels (track use), Matt Dammond OCC (VC and intake), Speed Performance Vented Oil Cap, Rice - 20% tint, Morimoto HID kit, Retrofit High Beams, Morimoto projector clear lenses, Corksport Hood Strut Kit, Corksport eyelids color matched, Ebay rear spoiler extension, Morimoto RGB Halos, LED Red Evil Eye, VG Shark Fin Antenna, Coil Cover, Blue Vacuum Hoses, Morimoto LED low beams, Cover King custom Seat Covers |
10-16-2014, 08:39 AM | #10 |
Approved MSF Vendor Join Date: May 2008 Location: Beltsville, Maryland
Posts: 1,728
(View Stats)
iTrader: (0)
Rep Power: 2499 Thanks: 425
Thanked 4,675 Times in 997 Posts
Groans: 10
Groaned at 115 Times in 51 Posts
| Not Ranked : 0 score PM sent
__________________ Website: www.cp-e.com Facebook: www.facebook.com/gocpe Twitter: www.twitter.com/gocpe |
The Following User Says Thank You to www.cp-e.com For This Useful Post: | Zoom66 (10-16-2014) |
10-16-2014, 05:39 PM | #11 |
Join Date: Jul 2014
Posts: 103
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 31
Thanked 95 Times in 54 Posts
Groans: 2
Groaned at 9 Times in 8 Posts
| Not Ranked : 0 score
__________________ "This is your life. And it's ending one minute at a time." |
10-17-2014, 01:48 PM | #12 |
Join Date: Aug 2013 Location: Bartlesville, OK
Posts: 281
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 195
Thanked 242 Times in 121 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
(Thread Starter) | Not Ranked : 0 score What you know it shipped today back to me. 1 day turn around.
__________________ 2013 MS3 Velocity Red - FLOW Tuned 25% E85 Mods - GTX2867R Turbo, Snow Meth Kit, Forged Manley Platinum pistons and Rods, Matt Dammond Balance Shaft Delete, Southbend Stage 3 Clutch, SPerformance Aux Fan Controller, 4" HTP Intake, Greddy FV BOV, Stratified Guardian Angel V2, Cobb AP V3, Tanabe Strut Tower Brace, Magna-flow CBE, HPFP Autotech Internals, CorkSport Shifter Bushings, CorkSport short throw shifter, CP-e Stage 2 RMM, CP-e Catless Downpipe, QTP Electric Exhaust Cutoff, NGK one step colder plugs, Cobb 3-port EBCS, Whiteline FSB, EBC 3GD Slotted Rotors, Hawk HPS Brake Pads, Goodridge Stainless Steel Brake Lines, HTP Small Battery Box, 51R Optima Yellow, SPC adjustable Rear Camber Arms, KW Variant 3 Coilover setup, Matt Dammond Passenger and Transmission mounts, Falken Azenis tires (street use), Defi Boost Gauge, AEM UEGO Wideband Gauge, AEM Water Temperature Gauge, AEM Oil pressure gauge, Corksport Short Shifter, Apexi Turbo Timer, Corksport Skid Plate, Threadstone TR8 core and crash bar, DOCRACE exhaust manifold, Reletnless Customs Ported IM, JBR 250 Competition Rear Sway Bar, Kuhmo V710 on RX8 wheels (track use), Matt Dammond OCC (VC and intake), Speed Performance Vented Oil Cap, Rice - 20% tint, Morimoto HID kit, Retrofit High Beams, Morimoto projector clear lenses, Corksport Hood Strut Kit, Corksport eyelids color matched, Ebay rear spoiler extension, Morimoto RGB Halos, LED Red Evil Eye, VG Shark Fin Antenna, Coil Cover, Blue Vacuum Hoses, Morimoto LED low beams, Cover King custom Seat Covers |
10-17-2014, 01:53 PM | #13 |
Join Date: Oct 2011 Location: Murrieta, CA
Posts: 2,462
(View Stats)
iTrader: (2)
Rep Power: 2715 Thanks: 2,575
Thanked 5,181 Times in 1,272 Posts
Groans: 26
Groaned at 24 Times in 19 Posts
| Not Ranked : 0 score |
10-24-2014, 09:58 AM | #14 |
Join Date: Aug 2013 Location: Bartlesville, OK
Posts: 281
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 195
Thanked 242 Times in 121 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
(Thread Starter) | Not Ranked : 0 score DP installed. Sounds a lot better now without the cat. Now some logs to check my WGDC settings...
__________________ 2013 MS3 Velocity Red - FLOW Tuned 25% E85 Mods - GTX2867R Turbo, Snow Meth Kit, Forged Manley Platinum pistons and Rods, Matt Dammond Balance Shaft Delete, Southbend Stage 3 Clutch, SPerformance Aux Fan Controller, 4" HTP Intake, Greddy FV BOV, Stratified Guardian Angel V2, Cobb AP V3, Tanabe Strut Tower Brace, Magna-flow CBE, HPFP Autotech Internals, CorkSport Shifter Bushings, CorkSport short throw shifter, CP-e Stage 2 RMM, CP-e Catless Downpipe, QTP Electric Exhaust Cutoff, NGK one step colder plugs, Cobb 3-port EBCS, Whiteline FSB, EBC 3GD Slotted Rotors, Hawk HPS Brake Pads, Goodridge Stainless Steel Brake Lines, HTP Small Battery Box, 51R Optima Yellow, SPC adjustable Rear Camber Arms, KW Variant 3 Coilover setup, Matt Dammond Passenger and Transmission mounts, Falken Azenis tires (street use), Defi Boost Gauge, AEM UEGO Wideband Gauge, AEM Water Temperature Gauge, AEM Oil pressure gauge, Corksport Short Shifter, Apexi Turbo Timer, Corksport Skid Plate, Threadstone TR8 core and crash bar, DOCRACE exhaust manifold, Reletnless Customs Ported IM, JBR 250 Competition Rear Sway Bar, Kuhmo V710 on RX8 wheels (track use), Matt Dammond OCC (VC and intake), Speed Performance Vented Oil Cap, Rice - 20% tint, Morimoto HID kit, Retrofit High Beams, Morimoto projector clear lenses, Corksport Hood Strut Kit, Corksport eyelids color matched, Ebay rear spoiler extension, Morimoto RGB Halos, LED Red Evil Eye, VG Shark Fin Antenna, Coil Cover, Blue Vacuum Hoses, Morimoto LED low beams, Cover King custom Seat Covers |
10-24-2014, 10:32 AM | #15 |
Join Date: Dec 2011 Location: Red Deer,AB Canada
Posts: 3,279
(View Stats)
iTrader: (6)
Rep Power: 0 Thanks: 4,855
Thanked 4,338 Times in 1,621 Posts
Groans: 189
Groaned at 64 Times in 21 Posts
| Not Ranked : 0 score I am gonna go out on the limb here and say, I am surprised. Good on cp-e.
__________________ 2010 Mazdaspeed 3 Black Mica w/ Tech Package - Traded In 2014 Ford F150 FX4 Ecoboost - Current |
10-24-2014, 10:37 AM | #16 |
Join Date: Jan 2011 Location: Jacksonville, FL
Posts: 656
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 311
Thanked 332 Times in 182 Posts
Groans: 1
Groaned at 5 Times in 3 Posts
| Not Ranked : 0 score Damn, I would hate to remove my DP again. Time to update your sig
__________________ 08 MazdaSpeed3 | Cobb AP | MS Intake | CS TIP | CP-E FMIC | CNT Catless TBE | ITV22 | | AutoTech Internals | TurboSmart BOV | BC Racing Coilovers | CS RMM | CS TMM | | Black Powdercoated Stockers | Built Motor | | Mahle 88mm Pistons | Manley H-Beam Rods | |
10-24-2014, 11:47 AM | #17 |
Join Date: Aug 2013 Location: Bartlesville, OK
Posts: 281
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 195
Thanked 242 Times in 121 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
(Thread Starter) | Not Ranked : 0 score The third time is a charm. Was not that bad of a job as I don't have any of the heat shields installed since I upgraded the turbo...
__________________ 2013 MS3 Velocity Red - FLOW Tuned 25% E85 Mods - GTX2867R Turbo, Snow Meth Kit, Forged Manley Platinum pistons and Rods, Matt Dammond Balance Shaft Delete, Southbend Stage 3 Clutch, SPerformance Aux Fan Controller, 4" HTP Intake, Greddy FV BOV, Stratified Guardian Angel V2, Cobb AP V3, Tanabe Strut Tower Brace, Magna-flow CBE, HPFP Autotech Internals, CorkSport Shifter Bushings, CorkSport short throw shifter, CP-e Stage 2 RMM, CP-e Catless Downpipe, QTP Electric Exhaust Cutoff, NGK one step colder plugs, Cobb 3-port EBCS, Whiteline FSB, EBC 3GD Slotted Rotors, Hawk HPS Brake Pads, Goodridge Stainless Steel Brake Lines, HTP Small Battery Box, 51R Optima Yellow, SPC adjustable Rear Camber Arms, KW Variant 3 Coilover setup, Matt Dammond Passenger and Transmission mounts, Falken Azenis tires (street use), Defi Boost Gauge, AEM UEGO Wideband Gauge, AEM Water Temperature Gauge, AEM Oil pressure gauge, Corksport Short Shifter, Apexi Turbo Timer, Corksport Skid Plate, Threadstone TR8 core and crash bar, DOCRACE exhaust manifold, Reletnless Customs Ported IM, JBR 250 Competition Rear Sway Bar, Kuhmo V710 on RX8 wheels (track use), Matt Dammond OCC (VC and intake), Speed Performance Vented Oil Cap, Rice - 20% tint, Morimoto HID kit, Retrofit High Beams, Morimoto projector clear lenses, Corksport Hood Strut Kit, Corksport eyelids color matched, Ebay rear spoiler extension, Morimoto RGB Halos, LED Red Evil Eye, VG Shark Fin Antenna, Coil Cover, Blue Vacuum Hoses, Morimoto LED low beams, Cover King custom Seat Covers |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
In stock now CNT Racing Mazdaspeed 3 catted and non Catted downpipe | ERZperformance | ERZPerformance | 325 | 08-04-2013 05:13 PM |
CA laws, DP, catted/non catted | galens47 | Gen2 MS3 General Discussion | 15 | 06-19-2012 06:59 PM |
Catted downpipe + catted racepipe | mituc | MazdaSpeed 3/6 - Turbo Induction | 65 | 11-29-2011 04:43 PM |