MS6 triple pod for people with Nav.

[redmnsterut]

Originally Posted by nattun You know what we need? A MS6 DH vent mount(Ive only ever seen them for the MS3's?). A dual pod with DH mount and 52mm guage pod... I would buy that in a heartbeat

THIS!! I was actually just thinking of that while reading through this and then read your post. I think a mount for the DH or AP would be sick to have. I used the cell mount on the window and always fell off. I have a mount now that I made and works, but something that would give an almost stock feel and look would be nice.

@Block8head you should look into it when you get time as your next project!

[DiGi Faggot]

Originally Posted by Mistersix This is what i currently use. The color and finish was off and the fitment is not good. But i went to work on it and made the best i could out of it. If i could make that it would hold 60mm gauges possibly. A hood would be nice to, they can be hard to see at times. And the bottom goes straight down leaving what looks like a gap. It would follow the contour of the dash all the way down to the mutli-display and sit flush with it. And the finish would be exactly the same as the multi-display below it giving a factory appearance. And i would keep the price below 99 bucks.

I have this same pod. I used black silicone to hold it in. Works well if you do a line across the top and bottom on the dash. Then fill in the gaps on the sides. Looks good too.

FITMENT IS HORRID.

I would buy a new one from Blockhead if he offered one with good fitment for a reasonable price.

[SpeedSixxx]

i'm gonna need one asap, will this be ready with in 2 weeks or should I order the ebay one?

[Mistersix]

Originally Posted by DiGi Faggot I have this same pod. I used black silicone to hold it in. Works well if you do a line across the top and bottom on the dash. Then fill in the gaps on the sides. Looks good too. FITMENT IS HORRID. I would buy a new one from Blockhead if he offered one with good fitment for a reasonable price.

I actually weighted mine for a few weeks to get it to sit flat. Then used double sided tape.

I would rebuy were there a better option that had a hood.

[Ray Danger 2020]

Originally Posted by mike16241 Hey block head is there a way to put 3 gauges right above the center vents in the 2nd gen i think they would look good and give us more options

I don't think that would work out too well because of the screen for the NAV and the radio are up there and the gauges would get in the way. Also, idk what's underneath there.

[DiGi Faggot]

Originally Posted by Mistersix I actually weighted mine for a few weeks to get it to sit flat. Then used double sided tape. I would rebuy were there a better option that had a hood.

I put mine in with silicone and set something on it for it to set.

[Block8head]

i though the title of this thread said the pod is for people with nav?

[chuckms6]

Originally Posted by Block8head i though the title of this thread said the pod is for people with nav?

lol sorry to get off topic, someone asked a question...

[mike16241]

Originally Posted by Ray Danger 2020 I don't think that would work out too well because of the screen for the NAV and the radio are up there and the gauges would get in the way. Also, idk what's underneath there.

Its a lil bit to the right of the nav and theres a speaker behind the vents im thinking about molding 3 into the dvent plastic peice

[Ray Danger 2020]

Hey @Block8head. Any progress on the triple pod for genpu?

[Block8head]

Originally Posted by Ray Danger 2020 Hey @Block8head. Any progress on the triple pod for genpu?

Been busy working like a machine..
i'll look into it sometime next week..

[Oshi53]

Sorry new to the this but how can I get one for my MS6?

[Fstrnyou]

Are you new to internetz too?

Try searching google before reviving an ancient thread to ask a silly question.