| |
 |  |  |  |  |  |
 |
| |||||||
| MazdaSpeed 3/6 - Turbo Induction MazdaSpeed 3/6 - Turbo Induction - Have a turbo, intercooler, downpipe question? Anything turbo related belongs here! |
|
Welcome to Mazdaspeed Forums . You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. *When you join MSF as a registered user, there will be No Ads. *Registered Members get access to the Off Topic Area of the Forum *Registered Members have an opportunity to upgrade their accounts to VIP, which brings a host of goddies for supporting MSF such as Raffles, Additional Forum Access, More PM Storage, The ability to upload more Images and many other enhancements. *Registered members also get access to the live chat box! |
 |
| |  | LinkBack | Thread Tools | Search this Thread | Display Modes |
 | 
02-20-2011, 09:57 PM
| #361 |  |
   Join Date: Mar 2008 Location: Boise, Idaho
Posts: 1,769
(View Stats)
iTrader: (3)
Rep Power: 1905   Thanks: 229
Thanked 3,470 Times in 924 Posts
Groans: 0
Groaned at 13 Times in 11 Posts
|   Not Ranked : 0 score 
__________________ 2008 Mazdaspeed3, Fully built then fully parted. Sold 2007 ccsb Silverado, 3/5 drop Procharged, longtubes, 10psi Daily Mazdaspeed 12.5 @109 k04 stock ecu 18psi pump gas stock motor 311whp 11.7 @120 atp gtx3071r ap tuned 22psi 30/70 e85/pump stock motor. 422whp |
|   |
| The Following User Says Thank You to driver311 For This Useful Post: | SilverDemon (02-21-2011) |
|
02-22-2011, 11:54 AM
| #362 | |
 Join Date: Jan 2010
Posts: 98
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 0
Thanked 36 Times in 14 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
| Not Ranked : 0 score hey demon ive become pretty good with a program called pro desktop its kinda like auto cadif u wanna get in touch with me i can do my best to cad out each component with full drawings and everythings |
|
| |
| The Following User Says Thank You to cwpms3gt For This Useful Post: | SilverDemon (02-22-2011) |
|
02-22-2011, 02:07 PM
| #363 | |
| Captain   Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score
__________________ 500awhp 440awtq uncorrected  EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com | |
|
| |
| The Following 12 Users Say Thank You to djuosnteisn For This Useful Post: | 06Speed6 (02-22-2011), DingoDave (02-23-2011), JacksonMS30 (02-23-2011), MPSdriver (03-17-2011), nighthawk358 (03-22-2011), ScarMS3 (03-22-2011), SilverDemon (02-22-2011), socks (03-22-2011), spnkr21 (01-12-2012), superskaterxes (02-22-2011), X-Man (02-22-2011), zpele (08-21-2011) |
|
02-22-2011, 02:12 PM
| #364 | |
  Join Date: Mar 2008 Location: Jacksonville, NC
Posts: 3,989
(View Stats)
iTrader: (0)
Rep Power: 2468 Thanks: 810
Thanked 4,571 Times in 1,692 Posts
Groans: 60
Groaned at 17 Times in 12 Posts
| Not Ranked : 0 score All the best technical drawings are done on napkins..
__________________ Fully Built : Arias Pistons: Pauter Rods : ARP bolts: Ported Head: Cosworth BSD : Spec 3+ Clutch : Fidanza Flywheel : AWR Engine mounts 90duro : Custom TIP/Intake : Custom Blow Through 3.5" MAF : Custom FMIC : HKS SSQV VTA : Ported IM : Custom DP : Custom Exhaust : CPBoost Top Mount EM : Garrett GT3582R : PTP Turbo Blanket: Tial V44 EWG : Perrin EBCS : MrLilGuy/PTP HPFP : Ported fuel line : Ported Fuel Rail : Custom Ported Fuel Injectors : Kenny Bell Boost-a-Pump : HKS Twin Power DLI II : HKS M-Series Plugs : Cobb AP : AEM 3.5bar MAP :Koni Sport shocks : RPM Kspec Springs : TWM STS : TT Front Diff Mount : CPE Upper Diff Mount : Whiteline RSB : AWR Endlinks |
|
| |
| The Following 9 Users Say Thank You to SSinstaller For This Useful Post: | 06Speed6 (02-22-2011), djuosnteisn (02-22-2011), JacksonMS30 (02-23-2011), nighthawk358 (03-22-2011), phantom3 (02-26-2011), ScarMS3 (03-22-2011), SilverDemon (02-22-2011), socks (02-22-2011), zpele (08-21-2011) |
|
02-22-2011, 02:24 PM
| #365 | |
 Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Almost a year and half ago this was my first rendition of the manifold in MS paint......hahahaha
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following 3 Users Say Thank You to SilverDemon For This Useful Post: |
|
02-22-2011, 03:24 PM
| #366 | |
| Eth/Meth Junkie  Join Date: Mar 2008 Location: Columbus, OH
Posts: 2,998
(View Stats)
iTrader: (1)
Rep Power: 2957 Thanks: 1,846
Thanked 5,488 Times in 1,740 Posts
Groans: 3
Groaned at 3 Times in 3 Posts
| Not Ranked : 0 score
 Paint.NET - Free Software for Digital Photo Editing
__________________ 08 MS3: ATP GTX3071 at 26PSI  , AEM Dryflow 21-2147DK, CP-E 3.25'' MAF, CP-E Nviscid TIP, PG FMIC piping with Treadstone TR11 core, Cobb BPV, Ported IM, PG v1 manifold, CP-E catted DP, CNT CBE, KMD v2, Grimspeed EBCS, Alkycontrol Meth injection (M10 with 100% meth), E40 fuel, Cobb AP (ATR= WIN), ACT ZX4-HDSS, 3-Bar MAP, JBR RSB, and CP-E 60 Duro Engine Mount Set. (297.3WHP/366.9WTQ - on K04, 469.2WHP/420.7WTQ - on GTX3071)  | |
|
| |
| The Following 2 Users Say Thank You to cld12pk2go For This Useful Post: | djuosnteisn (02-22-2011), SilverDemon (02-22-2011) |
|
02-26-2011, 04:09 PM
| #367 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Install, little bit of fail... but mostly win delete
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. Last edited by SilverDemon; 02-29-2012 at 02:23 PM. |
|
| |
| The Following 14 Users Say Thank You to SilverDemon For This Useful Post: | 06Speed6 (02-26-2011), AJ713 (02-28-2011), cpolly69 (02-26-2011), Dano (02-27-2011), DingoDave (02-27-2011), djuosnteisn (03-01-2011), Docnox (02-26-2011), JacksonMS30 (02-26-2011), MPSdriver (03-17-2011), skeeter149 (02-26-2011), Speed3eak (02-26-2011), spnkr21 (02-26-2011), wolly6973 (02-27-2011), zpele (08-21-2011) |
|
02-26-2011, 04:15 PM
| #368 | |
| Speeeeeed  Join Date: Mar 2008 Location: Corpus Christi, Tx
Posts: 6,530
(View Stats)
iTrader: (24)
Rep Power: 7490 Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
| Not Ranked : 0 score I dont think those are wear marks, all of the injectors that I own have identical marks, I also think that the seal would be wearing faster than the injector body and there is really no wear on the inside of the seals.
__________________ 2006 Mazdaspeed 6 P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG |
|
| |
| The Following User Says Thank You to 06Speed6 For This Useful Post: | SilverDemon (02-26-2011) |
|
02-26-2011, 04:17 PM
| #369 | |
 Join Date: Jun 2009 Location: Denver Colorado
Posts: 2,242
(View Stats)
iTrader: (8)
Rep Power: 2697 Thanks: 9,601
Thanked 5,080 Times in 1,373 Posts
Groans: 0
Groaned at 4 Times in 4 Posts
| Not Ranked : 0 score Oh GOD I just know something in my head is gonna be fubar'd when I pull the injectors out in a couple hours to change my seals... 59k miles worth of crapp to ruin my day...  Glad to see your car runs though! Can't wait for you to get some driving in! |
|
| |
| The Following User Says Thank You to JacksonMS30 For This Useful Post: | SilverDemon (02-26-2011) |
|
02-26-2011, 04:18 PM
| #370 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score That's interesting, the marks on the nozzles are not the same on all the injectors. What do you think it could be from? EDIT: I have 2 complete sets of used injectors, both with the same marks..some are deeper than others
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
|
02-26-2011, 04:22 PM
| #371 | |
| Must Have Teh 10's!   Join Date: Mar 2008 Location: Columbia, MD
Posts: 10,442
(View Stats)
iTrader: (9)
Rep Power: 10778 Thanks: 6,334
Thanked 21,014 Times in 5,264 Posts
Groans: 101
Groaned at 138 Times in 95 Posts
| Not Ranked : 0 score good job scott!!!!
__________________ 2006 Mazdaspeed 6 GT Black Mica #4126 KILLAH Built/SPEED PERF6RMANC3 (SP) 10.6:1 Pistons ~ SP 11mm H11 Head Studs ~ K1 rods ~ SP CNC Head Work ~ Crower 65lb Valve Springs ~ Fully Keyed/Pinned Motor ~ GTX35R w/Tial .82AR Hotside ~ JMF IM w/1000cc PI Injectors ~ SP 75mm TB ~ SP In-Tank FP w/Dual DW300's ~ AEM FPR ~ SP Custom PI Fuel kit ~ CPE 4" MAF ~ CPE SAFEseals ~ TR1035 FMIC ~ CPE Atmosphere DP/Ex Manifold/Oil/Water Lines ~ Tial MV-R EWG VTA'd ~ Denso ITV-24's ~ CPE Dual CBE ~ CPE BT TIP ~ CPE RMM ~ JBR TMM ~ JBR PMM ~ TTFMM ~ CPE RDM ~ Sonic Tuning CO's ~ LED Tails ~ Sonic Tuning HID's ~ Whiteline RSB ~ ACT 6 Puck w/unicorn dust First K04 in the 12's First MS6 in the 11's Certified RichTune E-Tuner |
|
| |
| The Following User Says Thank You to superskaterxes For This Useful Post: | SilverDemon (02-26-2011) |
|
02-26-2011, 04:23 PM
| #372 | |
| Speeeeeed Join Date: Mar 2008 Location: Corpus Christi, Tx
Posts: 6,530
(View Stats)
iTrader: (24)
Rep Power: 7490 Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
| Not Ranked : 0 score I dont know, but I dont think there is any way that the OEM seal can wear that injector nozzle with no or nearly no wear itself. My first impression was that it was a laser weld seam, but I dont know about that anymore.
__________________ 2006 Mazdaspeed 6 P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG |
|
| |
| The Following User Says Thank You to 06Speed6 For This Useful Post: | SilverDemon (02-26-2011) |
|
02-26-2011, 04:27 PM
| #373 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Weird, it might be from a fixture that holds the injector while it is being assembled....Just a thought..
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following User Says Thank You to SilverDemon For This Useful Post: | 06Speed6 (02-26-2011) |
|
02-26-2011, 04:30 PM
| #374 | |
 Join Date: Jan 2009 Location: ME, Kittery
Posts: 2,827
(View Stats)
iTrader: (12)
Rep Power: 1818 Thanks: 1,848
Thanked 3,296 Times in 1,369 Posts
Groans: 105
Groaned at 79 Times in 66 Posts
| Not Ranked : 0 score I think it's wear from the seals. There are tabs on new stock seals. They're gone when you take them off. Plus I'm sure they spin after awhile.
__________________ 2012 WRX HB w/mudflaps yo! |
|
| |
| The Following 2 Users Say Thank You to spnkr21 For This Useful Post: | djuosnteisn (03-01-2011), SilverDemon (02-26-2011) |
|
02-26-2011, 05:09 PM
| #375 | |
| Speeeeeed Join Date: Mar 2008 Location: Corpus Christi, Tx
Posts: 6,530
(View Stats)
iTrader: (24)
Rep Power: 7490 Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
| Not Ranked : 0 score I thought those tabs werent actually metal. Maybe I need to look at them again.
__________________ 2006 Mazdaspeed 6 P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG |
|
| |
|
02-26-2011, 06:41 PM
| #376 | |
 Join Date: Jun 2010 Location: li, merrick, new york
Posts: 1,792
(View Stats)
iTrader: (0)
Rep Power: 2273 Thanks: 4,757
Thanked 4,256 Times in 1,244 Posts
Groans: 8
Groaned at 13 Times in 12 Posts
| Not Ranked : 0 score For the temp sensor drill and tap the hole to a larger npt and use a plastic reducing bushing from 1/4 to 1/8 or whatever u need u can get them from home depot. I also think those lines are from the factory inj seal but I'm not positive. |
|
| |
| The Following 3 Users Say Thank You to kmac For This Useful Post: |
|
02-26-2011, 06:47 PM
| #377 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Yup..that is exactly what I am going to do with the temp sensor, either look to see if there is something off the shelf I can use, or make something to fit.
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
|
02-26-2011, 07:57 PM
| #378 | |
 Join Date: Jun 2008 Location: Greenville, SC
Posts: 3,250
(View Stats)
iTrader: (1)
Rep Power: 2562 Thanks: 1,586
Thanked 4,825 Times in 1,435 Posts
Groans: 125
Groaned at 21 Times in 20 Posts
| Not Ranked : 0 score
my guess too is that those are wear marks.
__________________ 1994 Mazda RX7 - 20b-rew - S480sx - Injector Dynamics - Xcessive Manufacturing - Full Function Engineering - Haltech Elite 2500 | |
|
| |
| The Following 3 Users Say Thank You to socks For This Useful Post: |
|
02-27-2011, 01:56 PM
| #379 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Solution for the BAT sensor ground problem.......
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following 9 Users Say Thank You to SilverDemon For This Useful Post: | 06Speed6 (02-28-2011), cld12pk2go (02-27-2011), cpolly69 (02-27-2011), djuosnteisn (03-01-2011), kmac (02-27-2011), MPSdriver (03-17-2011), spnkr21 (02-27-2011), wolly6973 (02-27-2011), zpele (08-21-2011) |
|
02-27-2011, 03:29 PM
| #380 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score delete
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. Last edited by SilverDemon; 02-29-2012 at 02:23 PM. |
|
| |
| The Following 14 Users Say Thank You to SilverDemon For This Useful Post: | 06Speed6 (02-28-2011), AJ713 (02-28-2011), DingoDave (02-27-2011), djuosnteisn (03-01-2011), JacksonMS30 (02-27-2011), Keemo577 (02-27-2011), MarkyMark (02-27-2011), MPSdriver (03-17-2011), NJSPEED3 (02-28-2011), spnkr21 (02-27-2011), superskaterxes (03-22-2011), turd burglar (02-27-2011), wolly6973 (02-27-2011), zpele (08-21-2011) |
|
02-27-2011, 03:45 PM
| #381 | |
 Join Date: Jan 2009 Location: Columbus Ohio
Posts: 2,116
(View Stats)
iTrader: (9)
Rep Power: 1087 Thanks: 2,958
Thanked 1,863 Times in 739 Posts
Groans: 27
Groaned at 28 Times in 22 Posts
| Not Ranked : 0 score in regards to your trims man - things looked great when we started it up the first time with your old maf table still in effect i say you just keep what you had on that and go from there for everything else...
__________________ 08 CB MS3 Sport Sold 01 MX-5 (Project) 03 P5 (DD) |
|
| |
| The Following User Says Thank You to cpolly69 For This Useful Post: | SilverDemon (02-27-2011) |
|
03-15-2011, 11:53 AM
| #382 | |
| Join Date: Jan 2010
Posts: 98
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 0
Thanked 36 Times in 14 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
| Not Ranked : 0 score are you going to be selling or providing atleast the specs so others can make this? |
|
| |
|
03-15-2011, 11:56 AM
| #383 | |
| Speeeeeed Join Date: Mar 2008 Location: Corpus Christi, Tx
Posts: 6,530
(View Stats)
iTrader: (24)
Rep Power: 7490 Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
| Not Ranked : 0 score Mine will be the only other one that will ever be made.
__________________ 2006 Mazdaspeed 6 P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG |
|
| |
|
03-15-2011, 12:59 PM
| #384 | |
| Join Date: Jan 2010
Posts: 98
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 0
Thanked 36 Times in 14 Posts
Groans: 0
Groaned at 2 Times in 2 Posts
| Not Ranked : 0 score ok then i want specs |
|
| |
|
03-15-2011, 01:02 PM
| #385 | |
| Captain Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score
I can't wait til the day all that hardware makes it on your car and you set the bar for what our platform can do. I also hope you don't shy too far away from a 7000 rpm redline.
__________________ 500awhp 440awtq uncorrected EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com | |
|
| |
| The Following User Says Thank You to djuosnteisn For This Useful Post: | I Love Brownies (03-15-2011) |
|
03-20-2011, 08:57 PM
| #386 | |
 Join Date: Mar 2010 Location: New Eagle, PA
Posts: 2,829
(View Stats)
iTrader: (0)
Rep Power: 2281 Thanks: 3,142
Thanked 4,197 Times in 1,405 Posts
Groans: 324
Groaned at 188 Times in 104 Posts
| Not Ranked : 0 score Do you think the "long," stroke would keep us away from 7k? |
|
| |
|
03-21-2011, 10:57 AM
| #387 | |
| Captain Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score I don't. I think 7200 is possible, just no one has tried it yet.
__________________ 500awhp 440awtq uncorrected EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com |
|
| |
|
03-21-2011, 08:38 PM
| #388 | |
| Speeeeeed Join Date: Mar 2008 Location: Corpus Christi, Tx
Posts: 6,530
(View Stats)
iTrader: (24)
Rep Power: 7490 Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
| Not Ranked : 0 score
The head is near complete, the oil system is near complete, the pcv system is near complete, I may work a deal with CPE for a 90mm short block. My L/A system is just getting started, its going to be pretty sweet. After that ill need a turbo, exhaust mani, and intake mani to be complete. Im shooting for a 5500 or 6000rpm redline, peak power between 2500 and 3000rpm.
__________________ 2006 Mazdaspeed 6 P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG | |
|
| |
| The Following User Says Thank You to 06Speed6 For This Useful Post: | djuosnteisn (03-22-2011) |
|
03-22-2011, 09:39 AM
| #389 | |
| Captain Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score 6000 rpm minimum.....  And if / when injectors become a reality (and i'm sure they will one day), i'll happily be revving out to 7200 all day long.
__________________ 500awhp 440awtq uncorrected EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com |
|
| |
| The Following User Says Thank You to djuosnteisn For This Useful Post: | 06Speed6 (03-22-2011) |
|
03-22-2011, 03:32 PM
| #390 | |
 Join Date: Jul 2008 Location: West Des Moines, IA
Posts: 1,770
(View Stats)
iTrader: (1)
Rep Power: 854 Thanks: 14
Thanked 1,379 Times in 530 Posts
Groans: 5
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score
__________________ _________________________________________ 2008.5 MS3 GT - Sold! 2011 Ford Flex LTD Ecoboost - Sold! 2013 Ford Focus SE - Sold! 1986 Porsche 944 Turbo - Sold! 2002 BMW M3 - Sold! 2014 Mustang GT 5.0 Track Pack 1974 GMC Super Custom 1500 built 350/TH400 3200 stall | |
|
| |
| The Following 2 Users Say Thank You to bnoon For This Useful Post: | 06Speed6 (03-22-2011), djuosnteisn (03-22-2011) |
|
03-22-2011, 04:01 PM
| #391 | |
| Speeeeeed Join Date: Mar 2008 Location: Corpus Christi, Tx
Posts: 6,530
(View Stats)
iTrader: (24)
Rep Power: 7490 Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
| Not Ranked : 0 score Even when bigger injectors come out, their hp support will still double as rpm is halved. If the oem injector is good for 400hp @ 7000rpm, then its good for 800hp @ 3500rpm... and thats ~1200lb of torque which might be enough for me.
__________________ 2006 Mazdaspeed 6 P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG |
|
| |
| The Following User Says Thank You to 06Speed6 For This Useful Post: | zpele (08-21-2011) |
|
03-22-2011, 05:22 PM
| #392 | |
| Captain Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score
Your turning your car into a diesel. But like a really really really really small diesel. A supercharger would be better for this application. I just think it's over board, and in the wrong direction. But it's my naive opinion, and i know your no dummy. So i'll kindly sit back and see what happens. Just wish it was happening real soon lol.
__________________ 500awhp 440awtq uncorrected EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com | |
|
| |
| The Following User Says Thank You to djuosnteisn For This Useful Post: | 06Speed6 (03-23-2011) |
|
03-22-2011, 05:59 PM
| #393 | |
| Join Date: Mar 2010 Location: New Eagle, PA
Posts: 2,829
(View Stats)
iTrader: (0)
Rep Power: 2281 Thanks: 3,142
Thanked 4,197 Times in 1,405 Posts
Groans: 324
Groaned at 188 Times in 104 Posts
| Not Ranked : 0 score I'd also like to add that a close-ratio gearbox is better served with moar RPMs, not less. |
|
| |
| The Following User Says Thank You to Mizzle For This Useful Post: | 06Speed6 (03-23-2011) |
|
08-10-2011, 03:37 PM
| #394 | |
 Join Date: Jul 2011 Location: Aurora, IL
Posts: 1,949
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 2,419
Thanked 1,735 Times in 868 Posts
Groans: 81
Groaned at 30 Times in 25 Posts
| Not Ranked : 0 score
wow this looks amazing man! IM IN! | |
|
| |
| The Following 3 Users Say Thank You to J-Liss For This Useful Post: |
|
LinkBacks (?)
LinkBack to this Thread: http://www.mazdaspeedforum.org/forum/forum/f11/silverdemon-s-intake-manifold-44765/ | ||||
| Posted By | For | Type | Date | |
| Get Ready for some XtremeBoost!!! - Mazda6 / Atenza | This thread | Refback | 02-19-2010 01:15 PM | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Intake manifold | QuickSpool | 2010 MS3 - Engine, Transmission & Driveline | 0 | 11-18-2009 06:19 PM |
4Likes
Linear Mode
