| |
 |  |  |  |  |  |
 |
| |||||||
| MazdaSpeed 3/6 - Turbo Induction MazdaSpeed 3/6 - Turbo Induction - Have a turbo, intercooler, downpipe question? Anything turbo related belongs here! |
|
Welcome to Mazdaspeed Forums . You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. *When you join MSF as a registered user, there will be No Ads. *Registered Members get access to the Off Topic Area of the Forum *Registered Members have an opportunity to upgrade their accounts to VIP, which brings a host of goddies for supporting MSF such as Raffles, Additional Forum Access, More PM Storage, The ability to upload more Images and many other enhancements. *Registered members also get access to the live chat box! |
 |
| |  | LinkBack | Thread Tools | Search this Thread | Display Modes |
 | 
02-08-2010, 06:45 PM
| #41 |  |
  Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725   Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) |   Not Ranked : 0 score 
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|   |
| The Following User Says Thank You to SilverDemon For This Useful Post: | SpeedSixxx (02-08-2010) |
|
02-08-2010, 11:10 PM
| #42 | |
  Join Date: Jul 2008
Posts: 264
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 16
Thanked 115 Times in 35 Posts
Groans: 2
Groaned at 4 Times in 4 Posts
| Not Ranked : 0 score Sub
__________________ That pic is in a Miata. Damn midget mobile. Seat was all the way back. Mods: Turbo Inlet, Short Ram, IDRVSLO's L2AIC, TRZ RMM, Shifter Bushings, PG Mani, CS DP,HF Cat, DS Trans Mount, Stiffened Passenger MM, CDFP Internals, Saikou Michi OCC, DIY BS Delete, DIY Windage Tray. Falken 235/45 17 7.5 |
|
| |
| The Following User Says Thank You to dukebrown For This Useful Post: | SilverDemon (02-12-2010) |
|
02-12-2010, 04:36 PM
| #43 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score A few posts back I talked about the fuel pressure sensor being an off the wall thread. It is a metric M10x1 with a 30* flare. I went to a hydraulic shop that said they could get me the right fitting. Well, that hydraulic shop failed at understanding what the thread pitch was. I tried to tell them that it was M10x1 straight thread with a 30* flare. They insisted it was a JIS BSPP fitting. They ordered the JIS fitting, and guess what? It did not fit, I looked at the guys there and said "Huh, must be metric ehh?" Idiots!!! The JIS fitting is a 1/4 19 thread, it is very close to the M10x1, but no match. The guy there said "just run a M10x1 tap down the fitting to straighten the threads out" I literally laughed out loud at them and said "are you serious, this has to be good for 2500 psi" I promptly walked out of there. Well, at least they tried LOL!! I just called another company local to me in Cincinnati, they specialize in hard to find fittings. They guy said that if he cannot find the fitting, they have an on site shop that can make what ever I need......Going there Monday to find out what they can do for me. Keeping fingers crossed......
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following 6 Users Say Thank You to SilverDemon For This Useful Post: | 06Speed6 (02-12-2010), BudUMfan (02-13-2010), djuosnteisn (02-12-2010), predapio (02-13-2010), SpeedSixxx (02-12-2010), superskaterxes (02-12-2010) |
|
02-12-2010, 04:42 PM
| #44 | |
  Join Date: Aug 2009 Location: Toronto, Ontario, CANADA
Posts: 630
(View Stats)
iTrader: (4)
Rep Power: 545 Thanks: 251
Thanked 814 Times in 246 Posts
Groans: 44
Groaned at 23 Times in 14 Posts
| Not Ranked : 0 score This manifold is shit....THAT I ABSOLUTELY WOULD WANT! Way to go mang!
__________________  |
|
| |
| The Following 2 Users Say Thank You to starscream For This Useful Post: | SilverDemon (02-12-2010), SpeedSixxx (02-12-2010) |
|
02-12-2010, 05:17 PM
| #45 | |
 Join Date: Apr 2009 Location: Bethpage, New York
Posts: 4,184
(View Stats)
iTrader: (6)
Rep Power: 4481 Thanks: 16,850
Thanked 8,659 Times in 1,398 Posts
Groans: 778
Groaned at 444 Times in 240 Posts
| Not Ranked : 0 score keep it going and get some more damn motivation. you are your own after market company? well, PLEASE be mine as well.
__________________ 2003 SilverStone Grey Honduh S2000    |
|
| |
| The Following User Says Thank You to SpeedSixxx For This Useful Post: | SilverDemon (02-12-2010) |
|
02-12-2010, 06:10 PM
| #46 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Yes, I am my own after market company, mainly for the reason that very few companies were making quality hard parts for the platform when I first got into the speed 3. Although, I am not a company, just one person that likes fabricating custom parts. I have fabbed many parts that I have not posted much about......
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following 2 Users Say Thank You to SilverDemon For This Useful Post: | djuosnteisn (02-13-2010), SpeedSixxx (02-12-2010) |
|
02-12-2010, 07:48 PM
| #47 | |
| Join Date: Apr 2009 Location: Bethpage, New York
Posts: 4,184
(View Stats)
iTrader: (6)
Rep Power: 4481 Thanks: 16,850
Thanked 8,659 Times in 1,398 Posts
Groans: 778
Groaned at 444 Times in 240 Posts
| Not Ranked : 0 score
__________________ 2003 SilverStone Grey Honduh S2000 | |
|
| |
| The Following User Says Thank You to SpeedSixxx For This Useful Post: | SilverDemon (02-12-2010) |
|
02-12-2010, 08:35 PM
| #48 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Most of the mods surround the front suspension for the Speed 3.......lower control arm bushings, fully adjustable anti-sway bay end links, and a fully adjustable traction bar set up. These three were designed to help cope with the wheel hop the car exhibits under hard launches at the track. Other parts include a custom catch can, my own take on a exhaust silencer, shift knob, a short intake designed from using a cut up CAI from CP-E.
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following 2 Users Say Thank You to SilverDemon For This Useful Post: | madvillain (02-15-2010), SpeedSixxx (02-12-2010) |
|
02-13-2010, 06:55 PM
| #49 | |
| Captain  Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score Can you make a jelly bobble head thing that mounts to the steering wheel and gives me bobble head while i auto-x?
__________________ 500awhp 440awtq uncorrected  EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com |
|
| |
| The Following 3 Users Say Thank You to djuosnteisn For This Useful Post: |
|
02-13-2010, 06:58 PM
| #50 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Hahaha.....With the right amount of money I can fab almost anything you want!!
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following User Says Thank You to SilverDemon For This Useful Post: | SpeedSixxx (02-14-2010) |
|
02-13-2010, 07:00 PM
| #51 | |
| Captain Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score Can you mold my face and make it look like me?
__________________ 500awhp 440awtq uncorrected EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com |
|
| |
| The Following 2 Users Say Thank You to djuosnteisn For This Useful Post: | SilverDemon (02-13-2010), SpeedSixxx (02-14-2010) |
|
02-13-2010, 07:04 PM
| #52 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score I will try and visualize what your face looks like from your typing
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
|
02-13-2010, 07:05 PM
| #53 | |
  Join Date: Jan 2009 Location: Columbus Ohio
Posts: 2,116
(View Stats)
iTrader: (9)
Rep Power: 1087 Thanks: 2,958
Thanked 1,863 Times in 739 Posts
Groans: 27
Groaned at 28 Times in 22 Posts
| Not Ranked : 0 score
__________________ 08 CB MS3 Sport Sold 01 MX-5 (Project) 03 P5 (DD) |
|
| |
| The Following 2 Users Say Thank You to cpolly69 For This Useful Post: | SilverDemon (02-14-2010), SpeedSixxx (02-14-2010) |
|
02-13-2010, 07:11 PM
| #54 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Is this close enough lol!!! just messin with ya.....
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following User Says Thank You to SilverDemon For This Useful Post: | djuosnteisn (02-13-2010) |
|
02-13-2010, 10:54 PM
| #55 | |
| Captain Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score
__________________ 500awhp 440awtq uncorrected EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com |
|
| |
| The Following User Says Thank You to djuosnteisn For This Useful Post: | SilverDemon (02-14-2010) |
|
02-14-2010, 05:49 AM
| #56 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Good God, that is insane!!!
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following User Says Thank You to SilverDemon For This Useful Post: | SpeedSixxx (02-14-2010) |
|
02-14-2010, 11:18 AM
| #57 | |
| Join Date: Apr 2009 Location: Bethpage, New York
Posts: 4,184
(View Stats)
iTrader: (6)
Rep Power: 4481 Thanks: 16,850
Thanked 8,659 Times in 1,398 Posts
Groans: 778
Groaned at 444 Times in 240 Posts
| Not Ranked : 0 score hahahaha funny video hahahahaha hahahaha i wanna see an asian dude, a white dude and a spanish dude do that too...it would make my day heeeeeeeeyyyyy
__________________ 2003 SilverStone Grey Honduh S2000 Last edited by SpeedSixxx; 02-14-2010 at 12:30 PM. |
|
| |
| The Following User Says Thank You to SpeedSixxx For This Useful Post: | djuosnteisn (02-14-2010) |
|
02-14-2010, 11:39 AM
| #58 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score I did not post it......
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following User Says Thank You to SilverDemon For This Useful Post: | SpeedSixxx (02-14-2010) |
|
02-14-2010, 11:51 AM
| #59 | |
| Join Date: Jan 2009 Location: Columbus Ohio
Posts: 2,116
(View Stats)
iTrader: (9)
Rep Power: 1087 Thanks: 2,958
Thanked 1,863 Times in 739 Posts
Groans: 27
Groaned at 28 Times in 22 Posts
| Not Ranked : 0 score
that was dj's post
__________________ 08 CB MS3 Sport Sold 01 MX-5 (Project) 03 P5 (DD) | |
|
| |
| The Following 3 Users Say Thank You to cpolly69 For This Useful Post: |
|
02-14-2010, 12:29 PM
| #60 | |
| Join Date: Apr 2009 Location: Bethpage, New York
Posts: 4,184
(View Stats)
iTrader: (6)
Rep Power: 4481 Thanks: 16,850
Thanked 8,659 Times in 1,398 Posts
Groans: 778
Groaned at 444 Times in 240 Posts
| Not Ranked : 0 score omg u tards...I can care less if anyone takes that video the wrong way..I was just joking. I havnt smoked weed in 2 days cause my dealers are dry =( maybe I should read while stoned so I can be more.....umm?? can't think when i'm sober.
__________________ 2003 SilverStone Grey Honduh S2000 |
|
| |
| The Following User Says Thank You to SpeedSixxx For This Useful Post: | SilverDemon (02-14-2010) |
|
02-14-2010, 12:39 PM
| #61 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score No biggie man, It's all good!!
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following User Says Thank You to SilverDemon For This Useful Post: | SpeedSixxx (02-14-2010) |
|
02-19-2010, 04:41 PM
| #62 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score After 2 weeks of searching and arguing with vendors over what thread pitch the pressure sensor is, I have found the solution. I had to do it with 2 fittings, but it will work exactly the way I wanted it to. Now I can get down to finalizing runner length, plenum size, and the exact location of the TB.
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. Last edited by SilverDemon; 11-18-2010 at 07:22 PM. |
|
| |
| The Following 2 Users Say Thank You to SilverDemon For This Useful Post: | djuosnteisn (02-19-2010), madvillain (02-19-2010) |
|
02-19-2010, 04:46 PM
| #63 | |
| Captain Join Date: May 2008 Location: Rio Rancho, NM
Posts: 11,480
(View Stats)
iTrader: (5)
Rep Power: 15759 Thanks: 33,656
Thanked 30,915 Times in 7,770 Posts
Groans: 79
Groaned at 34 Times in 32 Posts
| Not Ranked : 0 score where did you find those pieces?
__________________ 500awhp 440awtq uncorrected EFR8374 ms6, no meth, 50/50 e85, and IDCs in the 90's @ 500+ awhp, with room to grow... fifth port winning. Count down to head lift.... 3.... 2.... 30r ms3 dd on deck, has fuel... needs top mount turbo lovin' next... Check out the hair Salon: www.permtuning.com |
|
| |
| The Following User Says Thank You to djuosnteisn For This Useful Post: | SilverDemon (02-19-2010) |
|
02-19-2010, 04:48 PM
| #64 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. | |
|
| |
| The Following 5 Users Say Thank You to SilverDemon For This Useful Post: | 06Speed6 (02-19-2010), djuosnteisn (02-19-2010), madvillain (02-19-2010), SpeedSixxx (02-19-2010), superskaterxes (02-20-2010) |
|
02-19-2010, 09:50 PM
| #65 | |
| Speeeeeed   Join Date: Mar 2008 Location: Corpus Christi, Tx
Posts: 6,530
(View Stats)
iTrader: (24)
Rep Power: 7490 Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
| Not Ranked : 0 score Bitches this is a 06Speed6 approved thread of win.
__________________ 2006 Mazdaspeed 6 P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG |
|
| |
| The Following 3 Users Say Thank You to 06Speed6 For This Useful Post: |
|
02-19-2010, 10:22 PM
| #66 | |
 Join Date: Mar 2008 Location: STL, MO
Posts: 3,227
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 9,984
Thanked 59,653 Times in 1,171 Posts
Groans: 8
Groaned at 14 Times in 12 Posts
| Not Ranked : 0 score
__________________
 | ||
|
| |
| The Following 2 Users Say Thank You to ATE BALLER For This Useful Post: | predapio (02-20-2010), SilverDemon (02-20-2010) |
|
02-19-2010, 10:34 PM
| #67 | |
 Join Date: Sep 2008 Location: phoenix, az
Posts: 4,160
(View Stats)
iTrader: (4)
Rep Power: 0 Thanks: 9,229
Thanked 23,994 Times in 1,710 Posts
Groans: 78
Groaned at 17 Times in 15 Posts
| Not Ranked : 0 score The official "I want a fucking SilverDemon Intake Mani" member interest list... 1. Madvillain 2. 3. 4. 5.
__________________ [Precision 5557 T4 flanged Journal Bearing Turbo][Race Roots Ceramic Coated T4 Manifold][Race Roots 3" V-Band Catless Downpipe][Race Roots Under-Car FMIC kit][CXracing 18"x31"x3" IC Core][Tial 44mm EWG With 0.9Bar Spring][Cobb AP][Full Str33tunit Mount Set][Madvillain 4" Inlet/Intake][Cp-e xcelXL Maf Housing][Devilsown Meth Injection Kit][HKS Ignition Amplifier][Cp-e Catback Exhaust][HKS bov][PTP IM Spacer][Whoosh EGR Delete][AEM Digital Boost Gauge][Matt Damond OCC Kit][Trunk Mounted Optima Battery with KnuKonceptz Kit][Madvillain ECU box][TWM Short Shifter][BC Coilovers][Cobb Rear Sway Bar][Falken Azenis rt615's][Eibach Pro 25mm Spacers] |
|
| |
| The Following User Says Thank You to madvillain For This Useful Post: | SilverDemon (02-20-2010) |
|
02-19-2010, 10:37 PM
| #68 | |
 Join Date: Nov 2009
Posts: 198
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 120
Thanked 422 Times in 88 Posts
Groans: 7
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score I want one to hang on my wall and drool over. Silver, maybe you could just sell a 'some assembly required' kit, with just the parts and people could have their local welder do it. Just a thought!
__________________ Kriebs Speed and Power Development. AIM: KriebsSPD |
|
| |
| The Following 2 Users Say Thank You to mkriebs For This Useful Post: | SilverDemon (02-20-2010), SpeedSixxx (02-19-2010) |
|
02-19-2010, 10:45 PM
| #69 | |
| I have candy in my van  Join Date: Apr 2009 Location: Chicago, IL
Posts: 1,931
(View Stats)
iTrader: (18)
Rep Power: 2810 Thanks: 4,091
Thanked 5,279 Times in 1,154 Posts
Groans: 70
Groaned at 17 Times in 14 Posts
| Not Ranked : 0 score Great work SD, I'm interested to see the plenum fully welded up. I've had some plans as well on designing a manifold. I've drawn up the flange on SolidWorks roughly to where it's 99% perfect dimensions. Lots of time with a $200 micrometer. lol I want to at least get the flange made, and possibly get some runner and plenum welded on. I know a guy that used to do a lot of the welding at AMS, and he owes me a favor. This is kinda the path I would take for the plenum and runner design:
__________________ Current Fail: 2008 Mazda5 DD/Mazdaspeed5 BT project  |
|
| |
| The Following 5 Users Say Thank You to MATT DAMOND For This Useful Post: | 06Speed6 (02-20-2010), djuosnteisn (02-19-2010), madvillain (02-19-2010), SilverDemon (02-20-2010), SpeedSixxx (02-19-2010) |
|
02-19-2010, 11:14 PM
| #70 | |
| Join Date: Apr 2009 Location: Bethpage, New York
Posts: 4,184
(View Stats)
iTrader: (6)
Rep Power: 4481 Thanks: 16,850
Thanked 8,659 Times in 1,398 Posts
Groans: 778
Groaned at 444 Times in 240 Posts
| Not Ranked : 0 score actually dude, i started that first so... The official "I want a fucking SilverDemon Intake Mani" member interest list... 1. SpeedSixxx 2. Madvillain 3. 4. 5.
__________________ 2003 SilverStone Grey Honduh S2000 |
|
| |
| The Following 2 Users Say Thank You to SpeedSixxx For This Useful Post: | madvillain (02-19-2010), SilverDemon (02-20-2010) |
|
02-19-2010, 11:27 PM
| #71 | |
| Join Date: Sep 2008 Location: phoenix, az
Posts: 4,160
(View Stats)
iTrader: (4)
Rep Power: 0 Thanks: 9,229
Thanked 23,994 Times in 1,710 Posts
Groans: 78
Groaned at 17 Times in 15 Posts
| Not Ranked : 0 score Haha sorry man! I forgot about that one.
__________________ [Precision 5557 T4 flanged Journal Bearing Turbo][Race Roots Ceramic Coated T4 Manifold][Race Roots 3" V-Band Catless Downpipe][Race Roots Under-Car FMIC kit][CXracing 18"x31"x3" IC Core][Tial 44mm EWG With 0.9Bar Spring][Cobb AP][Full Str33tunit Mount Set][Madvillain 4" Inlet/Intake][Cp-e xcelXL Maf Housing][Devilsown Meth Injection Kit][HKS Ignition Amplifier][Cp-e Catback Exhaust][HKS bov][PTP IM Spacer][Whoosh EGR Delete][AEM Digital Boost Gauge][Matt Damond OCC Kit][Trunk Mounted Optima Battery with KnuKonceptz Kit][Madvillain ECU box][TWM Short Shifter][BC Coilovers][Cobb Rear Sway Bar][Falken Azenis rt615's][Eibach Pro 25mm Spacers] |
|
| |
| The Following 2 Users Say Thank You to madvillain For This Useful Post: | SilverDemon (02-20-2010), SpeedSixxx (02-20-2010) |
|
02-19-2010, 11:36 PM
| #72 | |
 Join Date: Mar 2008 Location: ft bliss, TX
Posts: 816
(View Stats)
iTrader: (2)
Rep Power: 0 Thanks: 221
Thanked 111 Times in 73 Posts
Groans: 18
Groaned at 40 Times in 20 Posts
| Not Ranked : 0 score sign me up! wait whats the price were looking at?
__________________ (RIP) 08' MS3---MODS:COBB AP- COBB SRI AND TIP- COBB RSB- COBB KNOB- CP-E TMIC- LIMITED EDITION HKS BOV- CORKSPORT DP AND TP- TRZ REARMOUNT- MD OCC- PTP IM COOLER KIT- COSWORTH BSD- EIBACH PROKIT- TWM SHIFTER BUSHINGS- JBR SHORT SHIFT KIT- 13' CWP MS3 |
|
| |
| The Following User Says Thank You to bombdotcom For This Useful Post: | SilverDemon (02-20-2010) |
|
02-20-2010, 03:24 AM
| #73 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Wow!! Guys, thanks for the words of encouragement!! Mkriebs, That is a very good idea, and it would save some money for the customer. MATT, If you really want the flange, I have it saved on the CnC machine. I can check the price on the material and machine time and get back to you. PM me if you are interested. I did experiment with round runners, it does not work well at all since our ports are different shapes and sizes. ATE BALLER, The silencer is really just a set up very similar to a glass pack design, I just made mine out of stainless steel. 06speed6, I do nothing but win for my car, LOL!!! Again, guys thanks for the positive feed back!!
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
| The Following 8 Users Say Thank You to SilverDemon For This Useful Post: | 06Speed6 (02-20-2010), bombdotcom (02-20-2010), cpolly69 (02-20-2010), djuosnteisn (02-20-2010), MarkyMark (02-20-2010), MATT DAMOND (02-21-2010), SpeedSixxx (02-20-2010), superskaterxes (02-20-2010) |
|
02-20-2010, 10:01 AM
| #74 | |
| Join Date: Mar 2008 Location: STL, MO
Posts: 3,227
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 9,984
Thanked 59,653 Times in 1,171 Posts
Groans: 8
Groaned at 14 Times in 12 Posts
| Not Ranked : 0 score What if the ports were to get machined to match the round? Could you make me a flange with round(er) ports? Recessed like yours? Let me know what that would cost, and I think we might be in business 
__________________
| |
|
| |
| The Following User Says Thank You to ATE BALLER For This Useful Post: | SilverDemon (02-20-2010) |
|
02-20-2010, 02:31 PM
| #75 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score Almost anything is possible. The only thing I would be worried about is trying to contour the transition from the round to the square port.
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
|
02-20-2010, 02:54 PM
| #76 | |
| Join Date: Mar 2008 Location: STL, MO
Posts: 3,227
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 9,984
Thanked 59,653 Times in 1,171 Posts
Groans: 8
Groaned at 14 Times in 12 Posts
| Not Ranked : 0 score That would all be in the head, unless you think you could work four of these into a rectangle at the end... Velocity Stacks
__________________
| |
|
| |
| The Following User Says Thank You to ATE BALLER For This Useful Post: | SilverDemon (02-20-2010) |
|
02-20-2010, 03:06 PM
| #77 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score If you were going to merge the ports in the head, or open the smaller one up to the same size as the larger one and contour everything in the head itself, then yeah, I think it could be done.
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
|
02-20-2010, 03:07 PM
| #78 | |
 Join Date: Oct 2008 Location: Alberta
Posts: 1,223
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 761
Thanked 1,102 Times in 307 Posts
Groans: 190
Groaned at 53 Times in 32 Posts
| Not Ranked : 0 score
__________________ My mission is to go fast.  Currently Designing: The golden girdle of the gods The CF "fuck your face" IM | |
|
| |
| The Following User Says Thank You to phantom3 For This Useful Post: | 06Speed6 (02-20-2010) |
|
02-20-2010, 03:11 PM
| #79 | |
| Join Date: Jul 2009 Location: Sardinia, Ohio
Posts: 3,034
(View Stats)
iTrader: (3)
Rep Power: 4725 Thanks: 5,721
Thanked 9,132 Times in 2,122 Posts
Groans: 6
Groaned at 3 Times in 3 Posts
(Thread Starter) | Not Ranked : 0 score That was actually my first idea, and I started to make the dies, but I just did not like the results I was ending up with. Maybe I needed to work with it a little more.
__________________ I am my own After Market Company. A common mistake that people make when trying to design something completely idiot proof is to underestimate the ingenuity of a complete idiot. - Douglas Adams Better to remain silent and be thought a fool than to speak out and remove all doubt. - Mark Twain Cops carry guns to protect themselves, not to protect you. READ THIS---- 2nd Amendment A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake. |
|
| |
|
02-20-2010, 05:01 PM
| #80 | |
| Join Date: Oct 2008 Location: Alberta
Posts: 1,223
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 761
Thanked 1,102 Times in 307 Posts
Groans: 190
Groaned at 53 Times in 32 Posts
| Not Ranked : 0 score
Should work better then. EDIT: if you want, send me your dims and i'll draw one up for you. free of charge.
__________________ My mission is to go fast. Currently Designing: The golden girdle of the gods The CF "fuck your face" IM | |
|
| |
| The Following User Says Thank You to phantom3 For This Useful Post: | SilverDemon (02-20-2010) |
|
LinkBacks (?)
LinkBack to this Thread: http://www.mazdaspeedforum.org/forum/forum/f11/silverdemon-s-intake-manifold-44765/ | ||||
| Posted By | For | Type | Date | |
| Get Ready for some XtremeBoost!!! - Mazda6 / Atenza | This thread | Refback | 02-19-2010 01:15 PM | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| |
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Intake manifold | QuickSpool | 2010 MS3 - Engine, Transmission & Driveline | 0 | 11-18-2009 06:19 PM |
4Likes
Linear Mode
