unique msp 3!

[iloveboost]

hey !

here are all the thing i do and put on the car,
i install and do everything by my own.

tint window
sri cpe
turbosmart bov
std coilover
arp wheel stud
apexi turbo timer
lamin-x
boost gauge
dai strike 18x8.5+38
spacersss
trz rrm
vent shade oem mazda
yellow drl
turbo inlet
oem mazda extremly rare side skirt sills
oem rear flare

and more ...

thing i do :

paint gloss black my roof
paint black mirror cover
tint all the interior in black
fabrics a-pillar
rolled /pulled/stretch fender
custom rear flare

more more more...

here's the picture from the beggining to today !

stock..


i dont have picture of the interior before i put it all black , anyway everyone know that the up-half is grey..








here is my handmade a-pillar !



oem window visor


painted my brand new rims, i have to sandblast the crhome part to make stick the paint




paint my roof black



wrinkle black emblems


yellow side markers


i have a 2008 msp. so i dont have piano black interior, so i paint it !








repaint my front end beacause many stoneships




shortshifter


black mirroir


arp wheel stud



here is my wheel fitment:
front i put 5mm spacer
rear 13 mm spacer
so the wheel setup is now
18x8.5 +33 front
18x8.5 +25 rear
i have to customise the rear fender...!!



(i repaint the rear fender because the paint craked while i do the ''fendre flare'', dont have picutre ..)

my extremly mega rare OEM mazdaspeed accesoire side skirt sills


custome flare from mazda sedan 2004-2006 gt-gfx, they were to long .




and now, pictures of the car ! note. some picture dont have all the thing mentioned, it because i dont have recent picutre.. !







more pic are to come.. i!

all comment are welcome

[ScarMS3]

I was initially thinning who is this douchebag, but you have got some skills, paint looks awesome, I think i would do wider tires as the stretched look isn't for me. Like the wheels though. This will probably be appreciated more on m247.com though.

Where are you from? Lots of rust, English rusty as well......French Canadian or from the bloc.

[m4tic]

This thread would be awesome if you didn't keep saying "msp3" ...


Just kidding that's a lot of work, it turned out nice.



But seriously it's "MS3"

[morgans22]

looks like you put alot of work into you MS3 looks good man

[asall667]

looks great!!!

[TWOptSL0W]

looks good now get some powaaaa

[iloveboost]

lol @ my english..
i'm french , from quebec. canada

i'm not very good in english but, it better than write in french ??..!!

if i put non-strech tire ( 225 on 8.5 it's not a mega strech..) it will rub on my fenders..

everything is set as close as 1 mm ..!

for the power, it will be next summer , ( i can't drive my car in winter so i store it )
i will put FMIC
cobb
and a dyno run, not more than this..!

HP is expensive..

and fine.. next time i will tell MS3.. no more msp3

[4G63]

Car looks great man awesome work all around!

[zpele]

Originally Posted by iloveboost lol @ my english.. i'm french , from quebec. canada i'm not very good in english but, it better than write in french ??..!! if i put non-strech tire ( 225 on 8.5 it's not a mega strech..) it will rub on my fenders.. everything is set as close as 1 mm ..! for the power, it will be next summer , ( i can't drive my car in winter so i store it ) i will put FMIC cobb and a dyno run, not more than this..! HP is expensive.. and fine.. next time i will tell MS3.. no more msp3

If you want to utilize that COBB get a SRI and RMM as well. The SRI will make huge power gains compared to the money it costs and the RMM will make the car ride and handle much better.

You got some skills though man it looks nice. A little too much for a drop on the wheels for me but its all in what you want.

[rikyrick87]

Looks good homie...like the wheels, how low was the drop?

[IshiKage]

getting my headliner and pillars done in black too

[AZSPEED3]

Looks great, more pics.

[NCZ13]

I too was expecting a shit ton of fail when I opened this thread, but im pleasantly surprised, thats some quality work my friend!

And holy shit its already snowing up there?

[jonlax]

I like the side skirts......anyway you could point me the right way to finding them?

[iloveboost]

wow ! so may comment only in one day !!!

ZPELE: i already have CPE SRI and TRZ rmm.. i need cobb accesport and fmic !!

jonlax: the side sill are B-O at mazda since 2007.. they are extremely rare and cost like 700$ new...

there are some replica's on ebay and other site , but there waren't OEM..!

NCZ13, no no, don't worry ! winter is far away, normally snow start at the end of november, so my car will be store from november 15, to 1st april !,
i have a fabulous honda civic 97 winter beater !



for the picture, next sunny day , i will take some shot all around !
stay tune

[PunjabiPlaya]

nice work, but too ricey herrafrush jdm vip yo for me

[jonspeed3]

i fuckin love it, looks awesome man, keep it up!

Also as far as the headliner, do you have a how to? Is it all just spray painted black or what?

...jealous of the black: interior pieces & headliner...

Nice job on the body and paint. Love the sills... part number?

Those wheels look just right on the car.

Well done!

[802MS3]

haha...I'm gonna have to do the same thing to my rear fenders. I'm running 17x9's with 255/45/17 and fucked up the rolling

looks awesome.

[dwagner88]

Came in to hate, leaving impressed. Just a hair too low for my tastes, but really nice work.

[Payne Racing 67]

Very nice man. Good skills. I do have to agree with the others though, a bit low for my taste. Would've liked to see 1/2 inch^

[maxed_out_saloon]

damn thats a sick ass MS3. keep up the good work meng, keep us posted!

[captain slow]

Its a bit too low I think... at least for me. But I love white wheels on red cars. And they look awesome! Also, I have an 07 and wish I had the gloss black interior. Nice work.

[eliminator]

was expecting fail, but obviously lots of win. Not a fan of the flush phenomenon, but looks good on your ride. Where at in Quebec?

[mazdaspdmike]

you are epic at painting your stuff man. I wish you lived here when I still had mine!

[starscream]

That all black interior is a mighty tempting mod...

[86AmishMs3]

When I was reading was expecting some half ass job by some deuchebag. But quite the opposite. Alittle too herra frush for me though.

[rghispanic88]

yo shit is looking good my maple syrup lovin friend

[forcedinduktion]

sheit looks legit

[ganque]

I like the black interior too! I'm considering doing it too!

[ZoomByU]

wow impressive. i would love the all black interior. good paint skills. im into the herrafrush fitment, but i wouldnt call this hellaflush unless you went 9.5 wide on the wheels. with that pull you could still fit 225/40 on there. overall thumbs up guy.

[super_pablo_]

u got some skills, looks clean. Personally, i prefer the hellafuntional look, more than the herrafrush, but... still, original and clean. congrats

[iloveboost]

hey thanks for all the comment ! i can't beleive it all wrote in 1 day !!!

for my headliner , it's a pretty easy mod to do, the hardest part is to remove enerything, for the tint, i use duplicolor vinyl and tissu paint, available at canadian tire for 10$ /can

for my side sill, i dont know the part number , but ar mazda dealer , he can find it , it's a mazdaspeed accssories part..

i know i'm very low and ''herraflush''(why herra instead hella ??) but notice thant eveything is setted properly , this is my daily drive and i don't have any probleme rolling everywehre,

maybe im a little bit ''herraflush'' like you said, but at least i have not big camber and poke, rust on fenders. etc. everything is well done , look good and functional ( i agree , maybe not as functinal as a stock one.. but still very drivable )

i'm from quebec city, for the one who asked.!

so , continue write me i really like to read you !
my car make some yays and nays for someones !
express

[iloveboost]

i just think,

if you want to see the complete build, with muchhh more picture , go here

Speed3 build up tranquille - Mazda 3 Quebec

!!

[super_pablo_]

good point, u dont have ridiculous camber, which saves u.

herra instead of hella, because herra is a mock of the japanese accent. thats very "JDM", which comes from japan.

[Simoli]

Originally Posted by iloveboost i'm not very good in english but, it better than write in french ??.

No no no, bad English > any French.

I don't care for the roof top or the A pillars. The rest I really like. I wish I was more comfortably paint things.

[Chimmike]

plaid=ugly.
not feeling the hella flush thing at all........and ya really don't need the turbo timer

Other than that, props for the work you've done..........at least you did the work.

[captain slow]

Originally Posted by iloveboost i just think, if you want to see the complete build, with muchhh more picture , go here Speed3 build up tranquille - Mazda 3 Quebec !!

I just checked this out and wow, some hard work you put in there. Good job. From this thread I learned 3 things.

1. I can't understand french.
2. I can understand pictures....which leads me to....
3. I need tint, fuckin now!!!!

[irishking03]

LOVE the interior look. Makes me want to brake my shit down and do it. I did all black interior on my last car..

[shaftyella]

Looks good. Like to see people pushing the platform and trying new things. I don't like the herrafrush look but you pull it off. Nice work.