GB: GROUND CONTROL + KONI SPORT Coilovers for Mazdaspeed 3!

[JDMJOSH]

Originally Posted by - POD - Order Placed!

Any chance I can get in on this as well?

[Shirls099]

I would like to get in on this GB, 100% will place order in the AM for GC + Koni.

[daafisch]

Originally Posted by KevinK2 Moving along to do a 1:28+ at Summit Point. My best with my stock Rx7 + tires was 1:30. Bravo! .

Thanks! I ran that with my gen 1 with a class legal stock boost map and most likely Hankook RS3's or Z1's, it was a about 2 years ago so I don't remember the exact tire.



Bump for more people to buy these.

[- POD -]

Originally Posted by JDMJOSH Any chance I can get in on this as well?

It should be fine. There will still be shipping from my folks place to Edmonton, but the goal is to save as much as we can and try to avoid as many tariffs as possible. Those tariffs are painful.

I'll PM you the address if you want to order. I'm going to have to cap it after you though. I don't want a pallet of springs and shocks going to my parents place. They are being kind enough to ship these up for me, I don't want to abuse it.

Let me know and I'll get that address to you.

Cheers!

[RPM]

Originally Posted by JDMJOSH Any chance I can get in on this as well?

Absolutely! Just order by tomorrow at midnight Central!

EDIT: Just realized you were talking to POD!

Originally Posted by Shirls099 I would like to get in on this GB, 100% will place order in the AM for GC + Koni.

Sounds great!

We have 15 orders in, so far. I know a couple more should come in the morning, so I think we should meet our goal of 20, as long as there are a few people waiting until the last minute!

[JDMJOSH]

Originally Posted by - POD - It should be fine. There will still be shipping from my folks place to Edmonton, but the goal is to save as much as we can and try to avoid as many tariffs as possible. Those tariffs are painful. I'll PM you the address if you want to order. I'm going to have to cap it after you though. I don't want a pallet of springs and shocks going to my parents place. They are being kind enough to ship these up for me, I don't want to abuse it. Let me know and I'll get that address to you. Cheers!

I thought you were driving them up. Wouldn't shipping from your parents house be just as expensive as getting them from rpm direct?

[Shirls099]

Order placed!

[timmcc02]

Last day of group buy! 4 more to go

[Mattyhawk1]

AHHHH! The suspense is killing me! Let's do this!

[Adog35]

Has ground control said anything about their camber plates?
@RPM

It seems the best short term solution is to run the OEM top-hats.

Has ground control had any updates on their camber plates? To me it seems the best short term solution is to run to OEM top-hat.

[Shirls099]

I called up GC about the front camber plates yesterday and was told they are still in pre-production development. The reason that they are not being produced yet is because they need to retool machines to make these, but are currently at capacity with other projects (busy with racing season). I was told a target date would be later in the summer and will have camber and caster adjustability. I think I will run OEM untill these are released.

[JDMJOSH]

Ordered!!!!! Now let's finish this people!

[Chimmike]

Way to pick it up down the stretch guys!

[speeddeamon]

Question: Why are people posting percentages next to the orders?

[RPM]

Originally Posted by speeddeamon Question: Why are people posting percentages next to the orders?

That was the original list of who was interested and how sure they were that they were in. Now, we just need people to place orders via our website. We're at 17, so 3 more to go!

[speeddeamon]

Originally Posted by RPM That was the original list of who was interested and how sure they were that they were in. Now, we just need people to place orders via our website. We're at 17, so 3 more to go!

thanks for the quick reply. Sent you an email.

[RPM]

Up to 18 now!

[speeddeamon]

Just placed my order!

[thepatient77]

Just placed my order as well! I got both, gc and koni yellows! Glad i saw the gb for this!! Sorry for waiting till the last minute

[RPM]

Originally Posted by thepatient77 Just placed my order as well! I got both, gc and koni yellows! Glad i saw the gb for this!! Sorry for waiting till the last minute

No problem! At 19 now!

[justinsane87]

1 LEFT!!!!!!!!


Sent from the flux capacitor

[Dumbguy]

Will we make it?!

[RPM]

Well, @Mike@Stratified promised to be #20 if no one else would, but I have a feeling there may be another person or two waiting until the very last minute...

[yourname2221]

Originally Posted by Mike@Stratified @RPM; if you get 19 orders paid please contact me directly and I will buy the last set to make you whole.

[timmcc02]

Originally Posted by yourname2221

Hahaha I died when I saw this, one more!

[bennyzoom]

Order placed for GC and Koni's. Let's dooooooo this

[gmoney542]

Originally Posted by Adog35 Has ground control said anything about their camber plates? @RPM It seems the best short term solution is to run the OEM top-hats.

I got Corksport camber plates. Last I heard GC quit development on their plates due to lack of interest but maybe that's changed with this group buy.


30 minutes left people!

I'M SO EXCITED TO GET THESE! @RPM; any idea when they'll be shipping from GC?

[RPM]

20 orders in! Still 30 minutes left if anyone wants in at the last minute!

I'll get all orders over to GC tomorrow. They said that the first 5-10 kits (in the order they were placed) will be able to ship immediately and that they have more kits already in production, so all of the remaining kits will ship within about 2 weeks or so. I'll continue to get updates as the days pass and post them here.

[therza2169]

Originally Posted by RPM 20 orders in! Still 30 minutes left if anyone wants in at the last minute! I'll get all orders over to GC tomorrow. They said that the first 5-10 kits (in the order they were placed) will be able to ship immediately and that they have more kits already in production, so all of the remaining kits will ship within about 2 weeks or so. I'll continue to get updates as the days pass and post them here.

I placed mine the first day, so hopefully mine will be in the first batch . Really looking forward to getting these on my car!

[[R]usty]

Nice I was order 5 I think so I should be in the first batch, sweet!

[yourname2221]

Originally Posted by RPM 20 orders in! Still 30 minutes left if anyone wants in at the last minute! I'll get all orders over to GC tomorrow. They said that the first 5-10 kits (in the order they were placed) will be able to ship immediately and that they have more kits already in production, so all of the remaining kits will ship within about 2 weeks or so. I'll continue to get updates as the days pass and post them here.

If i was anywhere on that first group, move me down to the bottom so someone else can get theirs first. I am in no rush.

[Mike@Stratified]

I had faith, but I did load up my PayPal account yesterday just in case I have no doubt that everyone who made a purchase will thoroughly enjoy these as it is an awesome set up.

[Mattyhawk1]

Thanks @RPM; and everyone in this thread who made this GB possible.

Great community as always

[Chimmike]

Originally Posted by yourname2221 If i was anywhere on that first group, move me down to the bottom so someone else can get theirs first. I am in no rush.

The sooner I get mine the better. 106k and counting on stock suspension and 80 miles/day commute=unhappy car

[timmcc02]

So what your saying is I shall recieve these tomorrow...ha jk but seriously Im excited like a 6 year old school girl

[Elvisrosales88]

Can you disclose who those 10 people are?

Sent from my Nexus 5 using Tapatalk

[daafisch]

I just want mine in time so I can get them installed and everything aligned before the next autox. Which is May 24th

[Dumbguy]

Originally Posted by yourname2221 If i was anywhere on that first group, move me down to the bottom so someone else can get theirs first. I am in no rush.

Same for me please.

[RPM]

Originally Posted by yourname2221 If i was anywhere on that first group, move me down to the bottom so someone else can get theirs first. I am in no rush.

I can definitely do this for anyone who wants, but I need you to PM me your real name, as I don't have your MSF name linked to your real name in any way.

[timmcc02]

Originally Posted by Elvisrosales88 Can you disclose who those 10 people are? Sent from my Nexus 5 using Tapatalk

^^^this in order