![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
|
| |||||||
| Revolution Performance Motorsports Revolution Performance Manufacturing (RPM) was started by three Mazda 6 enthusiasts in early 2004 under a simple premise: to develop and manufacture new products for the Mazda 6 at an affordable price. We began to realize our purpose with the short throw shifter and gas hood lifter kits for that vehicle. Since then, we have added many new aftermarket products from well-known manufacturers and continue to expand to offer products for other vehicles with the goal of having the best prices and customer service on the 'net. |
|
Welcome to Mazdaspeed Forums . You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. *When you join MSF as a registered user, there will be No Ads. *Registered Members get access to the Off Topic Area of the Forum *Registered Members have an opportunity to upgrade their accounts to VIP, which brings a host of goddies for supporting MSF such as Raffles, Additional Forum Access, More PM Storage, The ability to upload more Images and many other enhancements. *Registered members also get access to the live chat box! |
![]() |
| | | LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() | | #41 | ![]() |
| Approved MSF Vendor ![]() Join Date: Nov 2008 Location: Euless, TX
Posts: 1,149
(View Stats)
iTrader: (1)
Rep Power: 975 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 850
Thanked 1,653 Times in 598 Posts
Groans: 0
Groaned at 1 Time in 1 Post
(Thread Starter) | Not Ranked : 0 score Okay, here's the final official deal for this group buy: CP-E 3" Single-Exit Cat-Back Exhaust -- - straight pipe: $340 - with muffler, not welded in: $375 - with resonator, not welded in: $365 - with muffler and resonator, not welded in: $420 Muffler and resonator are the exact same units that CP-E normally welds in. They're just not welded in. The limit is 5 and all 5 must go to make this happen. If you want in, I need you to PM me stating so. First come, first served. List so far: @boost_addict - in @razorscs - in @Speed_j23 - in @06speedemon - in @Jspeedjones48 - maybe? Jspeedjones48, can you confirm? This is your last chance! Don't let someone steal this deal from you! |
| | |
![]() | | #42 | ![]() |
| Approved MSF Vendor ![]() Join Date: Nov 2008 Location: Euless, TX
Posts: 1,149
(View Stats)
iTrader: (1)
Rep Power: 975 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 850
Thanked 1,653 Times in 598 Posts
Groans: 0
Groaned at 1 Time in 1 Post
(Thread Starter) | Not Ranked : 0 score Gatorbait sent me a PM, so here are the "winners" - boost_addict, razorscs, Speed_j23, 06speedemon, Gatorbait I'll PM you with instructions shortly. |
| | |
![]() | | #43 | ![]() |
![]() Join Date: Jun 2012 Location: San Jose, CA
Posts: 3,093
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 5,963
Thanked 3,103 Times in 1,356 Posts
Groans: 47
Groaned at 72 Times in 45 Posts
| Not Ranked : 0 score You gotta love seeing this when you're checking out ImageUploadedByTapatalk1359702420.815364.jpg I'm curious though, does this exhaust actually weigh 40 lbs? @RPM
__________________ 2006 Mazdaspeed6 FreekTune | 91 | JBR 3", PMM & RMM | CS Racepipe, TMIC & TMM Inserts | Autotechs ![]() |
| | |
![]() | | #44 | ![]() |
![]() Join Date: Jun 2012 Location: San Jose, CA
Posts: 3,093
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 5,963
Thanked 3,103 Times in 1,356 Posts
Groans: 47
Groaned at 72 Times in 45 Posts
| Not Ranked : 0 score double post.
__________________ 2006 Mazdaspeed6 FreekTune | 91 | JBR 3", PMM & RMM | CS Racepipe, TMIC & TMM Inserts | Autotechs ![]() |
| | |
![]() | | #45 | ![]() |
![]() Join Date: Apr 2011 Location: Oviedo, FL
Posts: 809
(View Stats)
iTrader: (5)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 499
Thanked 558 Times in 317 Posts
Groans: 2
Groaned at 3 Times in 3 Posts
| Not Ranked : 0 score I'm very very interested in this...
__________________ Stock. |
| | |
![]() | | #46 | ![]() |
| Approved MSF Vendor ![]() Join Date: Nov 2008 Location: Euless, TX
Posts: 1,149
(View Stats)
iTrader: (1)
Rep Power: 975 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 850
Thanked 1,653 Times in 598 Posts
Groans: 0
Groaned at 1 Time in 1 Post
(Thread Starter) | Not Ranked : 0 score
Sorry man. It's over. :/
__________________ Last edited by RPM; 02-01-2013 at 08:07 AM. Reason: MSF Database - Automerged Doublepost | |
| | |
| The Following User Says Thank You to RPM For This Useful Post: | sidekick (02-01-2013) |
![]() | | #47 | ![]() |
| Approved MSF Vendor ![]() Join Date: Nov 2008 Location: Euless, TX
Posts: 1,149
(View Stats)
iTrader: (1)
Rep Power: 975 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 850
Thanked 1,653 Times in 598 Posts
Groans: 0
Groaned at 1 Time in 1 Post
(Thread Starter) | Not Ranked : 0 score Just FYI, we got orders from boost_addict, razorscs, 06speedemon, and Gatorbait |
| | |
![]() | | #48 | ![]() |
![]() Join Date: Mar 2012 Location: San Luis Obispo, CA
Posts: 391
(View Stats)
iTrader: (6)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 86
Thanked 163 Times in 97 Posts
Groans: 7
Groaned at 5 Times in 4 Posts
| Not Ranked : 0 score Mine is on it's way, supposedly will be here Thursday! Tappin'
__________________ 2007 MS6- BNR S3, HTP 3" Intake, 3 Bar MAP, DO Meth, CP-E Catted DP, Autotech Internals, SRI, ETS TMIC, Sure Sidewinder, Sure Charge Tubes, Lex tuned, BC Coils, Sure RMM, JBR SSP, Dreadnaught, Whiteline RSB 2008 Mazdaspeed3- Totalled! |
| | |
![]() | | #49 | ![]() |
![]() Join Date: Jun 2012 Location: San Jose, CA
Posts: 3,093
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 5,963
Thanked 3,103 Times in 1,356 Posts
Groans: 47
Groaned at 72 Times in 45 Posts
| Not Ranked : 0 score Same here. They were on top of it for sure.
__________________ 2006 Mazdaspeed6 FreekTune | 91 | JBR 3", PMM & RMM | CS Racepipe, TMIC & TMM Inserts | Autotechs ![]() |
| | |
![]() | | #50 | ![]() |
![]() Join Date: Mar 2012 Location: San Luis Obispo, CA
Posts: 391
(View Stats)
iTrader: (6)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 86
Thanked 163 Times in 97 Posts
Groans: 7
Groaned at 5 Times in 4 Posts
| Not Ranked : 0 score
__________________ 2007 MS6- BNR S3, HTP 3" Intake, 3 Bar MAP, DO Meth, CP-E Catted DP, Autotech Internals, SRI, ETS TMIC, Sure Sidewinder, Sure Charge Tubes, Lex tuned, BC Coils, Sure RMM, JBR SSP, Dreadnaught, Whiteline RSB 2008 Mazdaspeed3- Totalled! |
| | |
![]() | | #51 | ![]() |
![]() Join Date: Jan 2010 Location: Austin, TX
Posts: 1,681
(View Stats)
iTrader: (3)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 372
Thanked 954 Times in 487 Posts
Groans: 10
Groaned at 18 Times in 15 Posts
| Not Ranked : 0 score Fuck! I wanted one.... Lol |
| | |
| The Following 4 Users Say Thank You to Matx For This Useful Post: |
![]() | | #52 | ![]() |
| Approved MSF Vendor ![]() Join Date: Nov 2008 Location: Euless, TX
Posts: 1,149
(View Stats)
iTrader: (1)
Rep Power: 975 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 850
Thanked 1,653 Times in 598 Posts
Groans: 0
Groaned at 1 Time in 1 Post
(Thread Starter) | Not Ranked : 0 score If you missed this, or wanted a dual cat-back or whatever, shoot us a PM and we'll still give you a decent discount off of whatever it was you wanted. It won't be as good as this deal, obviously, but we can still help you out. |
| | |
| The Following User Says Thank You to RPM For This Useful Post: | sidekick (02-04-2013) |
![]() | | #53 | ![]() |
![]() Join Date: Mar 2012 Location: San Luis Obispo, CA
Posts: 391
(View Stats)
iTrader: (6)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 86
Thanked 163 Times in 97 Posts
Groans: 7
Groaned at 5 Times in 4 Posts
| Not Ranked : 0 score Installed! Love it, and love the deal even more. Thanks RPM! Sent from my Nexus 7 using Tapatalk 2
__________________ 2007 MS6- BNR S3, HTP 3" Intake, 3 Bar MAP, DO Meth, CP-E Catted DP, Autotech Internals, SRI, ETS TMIC, Sure Sidewinder, Sure Charge Tubes, Lex tuned, BC Coils, Sure RMM, JBR SSP, Dreadnaught, Whiteline RSB 2008 Mazdaspeed3- Totalled! |
| | |
![]() | | #54 | ![]() |
![]() Join Date: Sep 2009 Location: Skokie, IL
Posts: 611
(View Stats)
iTrader: (1)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 4,341
Thanked 542 Times in 265 Posts
Groans: 7
Groaned at 4 Times in 4 Posts
| Not Ranked : 0 score
Now! lol so did you install as straight pipe or did you get additional muffler/resonator welded in? Mine should be arriving tomorrow; going to be a while till I get installed going to pick up one or two Vibrant resonator and get everything welded in before putting it on. Can't wait!
__________________ New: 06 WWP MS6 Old: 06 LPM MS6 | |
| | |
| The Following User Says Thank You to Speed_j23 For This Useful Post: | sidekick (02-08-2013) |
![]() | | #55 | ![]() |
![]() Join Date: Mar 2012 Location: San Luis Obispo, CA
Posts: 391
(View Stats)
iTrader: (6)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 86
Thanked 163 Times in 97 Posts
Groans: 7
Groaned at 5 Times in 4 Posts
| Not Ranked : 0 score
Tappin'
__________________ 2007 MS6- BNR S3, HTP 3" Intake, 3 Bar MAP, DO Meth, CP-E Catted DP, Autotech Internals, SRI, ETS TMIC, Sure Sidewinder, Sure Charge Tubes, Lex tuned, BC Coils, Sure RMM, JBR SSP, Dreadnaught, Whiteline RSB 2008 Mazdaspeed3- Totalled! | |
| | |
![]() | | #56 | ![]() |
![]() Join Date: May 2012 Location: Jacksonville, NC
Posts: 135
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 1
Thanked 36 Times in 25 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score fuuuuuuuuuuuuuuuuuuu |
| | |
![]() | | #57 | ![]() |
![]() Join Date: Nov 2012 Location: Pinehurst, NC
Posts: 751
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 624
Thanked 426 Times in 245 Posts
Groans: 0
Groaned at 5 Times in 4 Posts
| Not Ranked : 0 score sent you a PM
__________________ 2006 TGM MS6 Cobb AP w/ SELFtune // Split Second AIC1-V4H // Stratified Guardian Angel // Stratified Boost Dial // ATP GTX3071r IWG // Devils Own Stage 1 WMI // JMF v2 Intake Manifold // 4 x Siemens DEKA IV 60 lph Injectors // Outlaw4shrt In-Tank Fuel Pump Kit w/ 255 lph pump // CP-E CDFP // CP-E SAFEseals // Clutchmasters 350 & flywheel // CX Racing FMIC // HTP 3.5" Intake // 3.5 Bar MAP // Cobb EBCS // Forge BPV v1 // XS Power Exhaust Manifold // M2 Downpipe w/ Highflow Cat // Corksport 80mm CBE // Blackworks Racing VTA OCC // NGK +1's // JBR EGR delete // Speedy 17x7.5 Lite Fin's w/ Hankook Ventus V2 225/50/R17 // TooLateTuning Springs // Bilstein B6 HD Shocks // Whiteline RSB // SPC Adjustable Ball Joints // Airlift 1000 "Drag Bags" // JBR 80 duro RMM // JBR 80 duro TMM // JBR 80 duro PMM // CP-E RDM // Turbine Tech FDM // OEM Spin-On Oil Filter Conversion // Prosport Oil Pressure and Oil Temp Gauge with Oil Filter Adapter Plate, Boost and EGT Gauges // AEM UEGO Wideband O2 & Fuel Pressure Gauges // Block8head MS6 dual 52mm vent pod // Lotek triple 52mm gauge pod // Prosport EVO Single Gauge Pod // Cobb Knob // Corksport LED Kit // Corksport LED Fogs // LED Tails // Audi LED DRL's 2008 MazdaSpeed 3 - R.I.P. 1/3/13 - from ENM 2014 |
| | |
![]() | | #58 | ![]() |
| Banned ![]() Join Date: May 2013
Posts: 48
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 11
Thanked 14 Times in 4 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Anything like this coming soon? I'm looking for the single exit w/resonator and muffler welded in. |
| | |
![]() | | #59 | ![]() |
| Banned ![]() Join Date: May 2013
Posts: 48
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 11
Thanked 14 Times in 4 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score |
| | |
![]() | | #60 | ![]() |
| Approved MSF Vendor ![]() Join Date: Nov 2008 Location: Euless, TX
Posts: 1,149
(View Stats)
iTrader: (1)
Rep Power: 975 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 850
Thanked 1,653 Times in 598 Posts
Groans: 0
Groaned at 1 Time in 1 Post
(Thread Starter) | Not Ranked : 0 score Sorry man. This was a one time offer to get rid of some overstock. We can offer you a discount on a new exhaust, but it won't quite compare to this offer. |
| | |
![]() | | #61 | ![]() |
![]() Join Date: Dec 2010 Location: Rio Rancho
Posts: 453
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 496
Thanked 631 Times in 163 Posts
Groans: 5
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Is this still going on?!?! Nvm just read the whole post
__________________ ^^^My fail boats^^^ 2006 mazdaspeed 6: fujita CAI, PG TIP, Turbosmart dual BOV, ITV22, Corksprt TBE, Cobb AP, SURE front/rear diff mounts(FTW), whiteline RSB 1978 280z(s30): currently needs some love....and going turbo o.0 1990 300zx: 850cc injectors, 300degree fuel rail, aeromotive FPR, garrett gt 28's twin turbo upgrade(@19psi), stillen IC's, CZP's 3in dp and mid pipe, Selin dual intakes, GTR R32 brakes, Nismo clutch, HKS hi-power exhaust, megan coil-overs, SPL full titanium suspension parts, z1 boost tubes, 2 AEM AFR's, AEM boost guage RWHP:???? RWTRQ: 475@4500 rpm. needs new clutch(blown). 2008 350z HR: Greddy dual Ti-C, Carbonetics LSD, Nismo diff, GTM TP's, Stillen CAI's ![]() (waiting on full metal CSC and carbonetic clutch and light wieght flywheel, then it's TT time!) currently on hold due to needing new clutch and flywheel/metal csc and master. wanting skyline manifold. Last edited by speedtoz; 03-17-2014 at 11:24 AM. Reason: MSF Database - Automerged Doublepost |
| | |
![]() | | #62 | ![]() |
![]() Join Date: Sep 2012 Location: Phoenix, Arizona
Posts: 730
(View Stats)
iTrader: (3)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 32
Thanked 394 Times in 221 Posts
Groans: 89
Groaned at 9 Times in 9 Posts
| Not Ranked : 0 score I've been really looking at exhaust upgrades for my Speed6 and have money burning a hole in my pocket for it, but I have to say I really like the dual exhaust look and sound. I also want the car quiet. If I could keep it the same decibel level as stock I would. Right now I'm thinking about the CPE Catted downpipe and MagnaFlow CBE. If you do a serious sale or group but on either of those I'm in. |
| | |
![]() | | #63 | ![]() |
![]() Join Date: Feb 2011 Location: Waterford,CT
Posts: 7,731
(View Stats)
iTrader: (3)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 11,169
Thanked 6,794 Times in 3,106 Posts
Groans: 423
Groaned at 15 Times in 15 Posts
| Not Ranked : 0 score
__________________ -Pat 2008 True Red MS3 GT3071R 'n Stuff SOLD 1999 Jeep XJ 6.5" Lift | Armor | 33" Tires | Bumpers 1996 Jeep XJ 3.5" Lift | 31" GY Duratracs | Bumpers 1994 Miata 15x8's w/NT05's | KYB AGX | Hardog Roll Bar | 70D Engine Mounts | |
| | |
![]() | | #64 | ![]() |
![]() Join Date: Sep 2012 Location: Phoenix, Arizona
Posts: 730
(View Stats)
iTrader: (3)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 32
Thanked 394 Times in 221 Posts
Groans: 89
Groaned at 9 Times in 9 Posts
| Not Ranked : 0 score
Holy shit! I didn't realize till just now how old this was. That's what I get for not reading things all the way through and trying to do my day job at the same time. Sorry for the thread revival. | |
| | |
![]() | | #65 | ![]() |
![]() Join Date: May 2012 Location: Newnan, GA
Posts: 1,792
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 902
Thanked 734 Times in 451 Posts
Groans: 1
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score I am so jelly right now
__________________ 08 cwp ms3 |
| | |
![]() | | #66 | ![]() |
![]() Join Date: Dec 2010 Location: Rio Rancho
Posts: 453
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 496
Thanked 631 Times in 163 Posts
Groans: 5
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Can I possibly get a hook up? Who do I pm?
__________________ ^^^My fail boats^^^ 2006 mazdaspeed 6: fujita CAI, PG TIP, Turbosmart dual BOV, ITV22, Corksprt TBE, Cobb AP, SURE front/rear diff mounts(FTW), whiteline RSB 1978 280z(s30): currently needs some love....and going turbo o.0 1990 300zx: 850cc injectors, 300degree fuel rail, aeromotive FPR, garrett gt 28's twin turbo upgrade(@19psi), stillen IC's, CZP's 3in dp and mid pipe, Selin dual intakes, GTR R32 brakes, Nismo clutch, HKS hi-power exhaust, megan coil-overs, SPL full titanium suspension parts, z1 boost tubes, 2 AEM AFR's, AEM boost guage RWHP:???? RWTRQ: 475@4500 rpm. needs new clutch(blown). 2008 350z HR: Greddy dual Ti-C, Carbonetics LSD, Nismo diff, GTM TP's, Stillen CAI's ![]() (waiting on full metal CSC and carbonetic clutch and light wieght flywheel, then it's TT time!) currently on hold due to needing new clutch and flywheel/metal csc and master. wanting skyline manifold. |
| | |
![]() | | #67 | ![]() |
| Approved MSF Vendor ![]() Join Date: Nov 2008 Location: Euless, TX
Posts: 1,149
(View Stats)
iTrader: (1)
Rep Power: 975 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 850
Thanked 1,653 Times in 598 Posts
Groans: 0
Groaned at 1 Time in 1 Post
(Thread Starter) | Not Ranked : 0 score You can PM me, @motherfnmonsta or @smoogs12 for pricing on anything we sell, or even things we don't sell that you think we should. |
| | |
| The Following 2 Users Say Thank You to RPM For This Useful Post: | motherfnmonsta (03-18-2014), smoogs12 (03-17-2014) |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anyone with CPE single exit with muffler, no resonator, and an aftermarket dp? | mczimer | MazdaSpeed 6 - Engine, Transmission & Driveline | 16 | 05-09-2012 08:43 AM |
| .wav of muffler and 2nd resonator removed | crtguns | MazdaSpeed 3 - Engine, Transmission & Driveline | 0 | 11-17-2011 04:03 PM |
| Single Exit Turbo Back Straight Pipe | bewsted | 2010 MS3 - Engine, Transmission & Driveline | 22 | 03-09-2011 07:53 PM |
| Custom Cat-Back Exhaust(single exit) | dadon1985 | 2010 MS3 - Engine, Transmission & Driveline | 29 | 01-16-2011 04:19 PM |