Got Aftermarket wheels? Show em off here!

[Dre]

Originally Posted by Crarrs These are going to be my autocross setup for this year, just mounted them last night. They're cheap, but they work, and I like the look. Drag DR-31 Bronze 17x8 ET+47 Offset Kumho Ecsta XS 245/40/17 The car looks higher than normal in these pics because it just came down off the jack and I hadn't settled the suspension yet.

nice.. any fitment issues? was thinking about doing 17x9, but found out id have to get new studs and spacers for the front..

[Crarrs]

Originally Posted by Dre nice.. any fitment issues? was thinking about doing 17x9, but found out id have to get new studs and spacers for the front..

No problems at all so far during street driving. All I needed to make these work was centering rings and lug nuts. Not sure about the 17x9, but if they say they'll fit with spacers, I don't see why you couldn't just get a wheel with a different offset to make it work without spacers. Check the wheel/tire fitment calculator in the sticky and juggle offsets to get an idea of what you need.

[Spoolme]

Here is a pic from my phone.

[Quickbluems3]

Originally Posted by Crarrs Nice! It's the real version of the wheels mine are a ripoff of! Looks good.

I think the DR-31s look more like the Work Emotion CR Kai (had them on my Evo) and I want them for my MS3!. I think i am going to go with the DR-31s though for less than half the price. I like those DR-31s you have and they look better without the center cap!

[Crarrs]

Originally Posted by Quickbluems3 I think the DR-31s look more like the Work Emotion CR Kai (had them on my Evo) and I want them for my MS3!. I think i am going to go with the DR-31s though for less than half the price. I like those DR-31s you have and they look better without the center cap!

Yeah, the rust on my hubs matches the bronze perfectly.

[klithammer]

Originally Posted by redblur My O.Z. wheels:

soooo nice. I'm currently looking for a new speed 3 in either grey or black, but that red does look good.

[redblur]

Thanks Klithammer


Sent from my iPhone using Tapatalk

[rfinkle2]

tsw nurburgring matte bronze...18x8.5+45

[dizzydtrain]

Looks awesome finkle

[rfinkle2]

redblur: your car looks great!

[Dre]

rfinkle: weight of those puppies?

[rfinkle2]

Originally Posted by Dre rfinkle: weight of those puppies?

i forget exactly but i did weigh them and they were 3-5 lbs less than the stock wheels, and an inch wider.

[Dre]

they look good sir! not enough weight reduction for me though.. im hoping to shed about 10lbs per corner (not counting tire weight) with 17" rpf1's

[bms3mtb]

those tsws are perfect color, near perfect design... may have found my next rims.

[Adog35]

Axis Halos Installed.
_MG_6921.jpg
_MG_6908.jpg

[drummermike58]

Gram Light 57 Pro
18x8 40 offset
factory dunslips

[Spoofmastafly]

Need some bigger pictures Drummer!

[drummermike58]

Originally Posted by Spoofmastafly Need some bigger pictures Drummer!

cant repost since they are in my other thread... heres link, bigger pics there. halfway down the page.

http://www.mazdaspeedforum.org/forum/foru...94/index2.html

[Spoofmastafly]

look really good!

[jrotaryb]

Originally Posted by rfinkle2 tsw nurburgring matte bronze...18x8.5+45

Looks nice - I have some 18x8.5 +45 forged gram lights 57F ready to go on as warmer weather approaches. Glad to know this size is nearly perfect.

H&R drop hopefully this week too - only 4 weeks old and 1050 miles on the clock hehe

[m.a.vega1]

Volk LE37's 8.5 w/ 40 offset.

[nuttzzy]

Black on Black just love it.. any style would love a drop tho.. not sure my daily need and town can handle a drop tho..

[3MPSPWR]

What size and offset is that??

[nuttzzy]

Originally Posted by 3MPSPWR What size and offset is that??

18x8.5 pffset not sure ill check and get back to you on that..

[shaftyella]

Here's my genpu:
Tenzo DC-5 ver 1
18x8 +45
Dunlop Stockers

DSCF0214.jpg

DSCF0217.jpg

[skawt01]

Sweet thread. Wish I could afford some rims about now. Looking to get black OZ Ultraleggera at some point.

[GNO]

Mazdaspeed (forged by Rays) powdercoated in "black chrome". I need to clean up the car and I'll take more pics during the day.

[dizzydtrain]

looks good. A drop would really set that off.

[BLK_MS3]

Originally Posted by GNO Mazdaspeed (forged by Rays) powdercoated in "black chrome". I need to clean up the car and I'll take more pics during the day.

Those do look good. Drop it and your golden.

[alien_sporez]

We can haz sticky?

[jnt]

Hello from Australia, I went with Advan RS-D in 19 x 8.5 +45 & Yokohama S Drive in 235 x 35. I know lots of you in the USA love the murdered out look, I didn't get the black color rims cause I didn't want to murder out the whole car.

[alien_sporez]

Originally Posted by jnt Hello from Australia, I went with Advan RS-D in 19 x 8.5 +45 & Yokohama S Drive in 235 x 35. I know lots of you in the USA love the murdered out look, I didn't get the black color rims cause I didn't want to murder out the whole car.

Holy crap, those look fantastic!!!

What springs do you have? How much of a drop?

[jnt]

Originally Posted by alien_sporez Holy crap, those look fantastic!!! What springs do you have? How much of a drop?

Thanks, I am lowered on the Eibach pro kit.

[dizzydtrain]

Originally Posted by jnt Hello from Australia, I went with Advan RS-D in 19 x 8.5 +45 & Yokohama S Drive in 235 x 35. I know lots of you in the USA love the murdered out look, I didn't get the black color rims cause I didn't want to murder out the whole car.

Sweet, that looks almost just like the Corksport speed3.

[JS + MS3]

looks very nice with that Advan rims. Congrats!

[Spoofmastafly]

jnt: Very nice looking gen2! Making me want to trade my h&r's in for that eibach kit.

[BLK_MS3]

Originally Posted by jnt Hello from Australia, I went with Advan RS-D in 19 x 8.5 +45 & Yokohama S Drive in 235 x 35. I know lots of you in the USA love the murdered out look, I didn't get the black color rims cause I didn't want to murder out the whole car.

Those look GOOD!

[jnt]

Originally Posted by dizzydtrain Sweet, that looks almost just like the Corksport speed3.

Actually the Corksport Speed3 gave me the confidence to go with the 19 x 8.5 and their Advan RZ also have an offset of +45 so after reading their blog I knew I would be safe from rubbing if I used the 235 x 35 Yokohama S Drive.

Originally Posted by JS + MS3 looks very nice with that Advan rims. Congrats!

Originally Posted by Spoofmastafly jnt: Very nice looking gen2! Making me want to trade my h&r's in for that eibach kit.

Originally Posted by BLK MS3 Those look GOOD!

Thanks for your comments, appreciated

[BeyonceSpeed3]

Originally Posted by jnt Hello from Australia, I went with Advan RS-D in 19 x 8.5 +45 & Yokohama S Drive in 235 x 35. I know lots of you in the USA love the murdered out look, I didn't get the black color rims cause I didn't want to murder out the whole car.

fuck yea! that looks good. center cap and call it done. may have to look into these even though they are big $$$$

and the whole "murdered out" look is shitty. looks terrible. bums me out every time i see a black MS3 on here with black everything. ugh.

[alien_sporez]

Originally Posted by BeyonceSpeed3 and the whole "murdered out" look is shitty. looks terrible. bums me out every time i see a black MS3 on here with black everything. ugh.

+1. But to each his own.