NEW!! JBR MAZDASPEED 3/6 Adjustable Short Shift Plates in Stock!!
 

http://www.jamesbaroneracing.com/Advert/logo.gif
James Barone Racing
Performance Aftermarket Parts & Accessories





Details:
Our Adjustable Short Throw Shift Plate kits are the simplest and most effective way to reduce the throw of your shifter by as little as 20% or by as much as 40%. Our kits come to you complete, and include stainless mounting hardware, Loctite and a perfectly matched Counter Weight. Our unique cable attachment point eliminates binding and rubbing of the shift cables unlike the other short shift plates kits on the market. They can even be installed by those with minimal mechanical knowledge in 30 minutes or less. Powder Coated in either Red, Blue or Black for durability and corrosion resistance.


STAGE 1 Adjustable Short Throw Shift Plate Kits

$80 Shipped! (Domestic Only)

Application:2006-2012 MAZDASPEED 3/6

The kit includes:
1 Adjustable Short Shift Plate
1 Counter Weight
Stainless Mounting Hardware
Loctite

http://www.jamesbaroneracing.com/sto...1-STSP-Red.jpg

STAGE 2 Adjustable Short Throw Shift Plate Kits
Includes Solid Shifter Base Bushings

$95.00 Shipped! (Domestic Only)

Application:2006-2012 MAZDASPEED 3/6

The kit includes:
Solid Shifter Base Bushings
1 Adjustable Short Shift Plate
1 Counter Weight
Stainless Mounting Hardware
Loctite

http://www.jamesbaroneracing.com/sto...-STSP-Blue.jpg

STAGE 3 Adjustable Short Throw Shift Plate Kits
Includes Solid Shifter Base Bushings
And 70a or 80a Durameter Billet Rear Motor Mount or the 88a Chrome Molly

$185.00-$215 Shipped! (Domestic Only)

Application:2007-2012 MAZDASPEED 3

The kit includes:
70a or 80a Durameter Billet Rear Motor Mount or the 88a Chrome Molly
Solid Shifter Base Bushings
1 Adjustable Short Shift Plate
1 Counter Weight
Stainless Mounting Hardware
Loctite

http://www.jamesbaroneracing.com/sto...STSP-Black.jpg

Awesome. I may pick another up since I did not like how much throw reduction the original provided.

nice job Jamie..

I just got my pre-adjustable installed this weekend and I'm not sure if I want to uninstall just for the free upgrade. I'm enjoying this thing too much.

I like the stage 3 with the RMM included. I think the first mod has been figured out. Now if I just had some extra money.

Just sent mine for the upgrade. I've had it for awhile and going back to stock sucks arse...
Can't wait to get it back...

subbed i will be exchanging mine.

how do you adjust the new plate? I have your first gen shift plate installed in my car, what throw is the gen1 plate set to vs what the 2nd gen plate comes with? Will the gen 2 plate go longer and shorter from where the gen 1 plate currently is at?

Sent from my Transformer TF101 using Tapatalk

OG JBR plates were at 40% reduction only.. Now you can move the riser thing left and right..basically he just made a slit...

for lazy matrix..http://jamesbaroneracing.com/support..._MS3_07-09.pdf

thanks ya

same here... i think ill check this out

@jbarone Can I buy just the short shift plate. I already have a weight. Shipping to 19128

Sorry they only come in a kit with the weight. Who's weight do you have?

I have the Sure Weight.

Sent mine back on Saturday, stock throw sucks for now.

How about a "Stage 4" kit with the shift knob?

I'll be buying all of that stuff once I get rid of my old WRX parts....

He has a kit including the knob

And it doesn't have the RMM...

Hmmm
Good point I'm on my phone so my bad

No worries, I could just order them together but I'm all for saving a few bucks if I can get them in a package.

Pm jbarone I'm sure he will take care of you

Anybody got theirs installed yet? Mine got lost in mail and have to wait again but I am curious about how these new ones are working out

I do. It's cool.

:haha:

It's fancy, works like a champ!

I almost wish I could take advantage of this awesome deal, but I'm perfectly happy with the throws the original SSP provides. If the new plate could offer shorter throws, I'd be all about it.

speed6 ???????????

What about it?

Does the speed6 get the updated plate also ?

Yes.

Guess my link wasn't proof enough.

Jamie, I have the OG shift plate from you. You still doing that deal for your ooooooooold plate?


Tapadatass

Yep! See the sticky above.

Intsalled the new SSP. I have to give myself a little time to adjust to the fact that the gear is engaged and not locked out of gear. I had to slightly adjust the shifter in cabin and this thing is fuckin awesome now. Shifts feel more tight and precise. I will be doing that ford tranny fluid swap in the near future...maybe as soon as this sunday, lol.

Stage 1 and 2 question
 

I see stage 2 comes with those bushings and stage 1 does not. I'd like to get the stage 1 to save some cash. Do I need those bushings? What do they do. Thanks guys.



D

The shifter housing sits on rubber bushings, which results in some lateral and fore/aft play when shifting. The solid bushings nearly eliminate this play and cause shifts to feel totally solid. I would absolutely recommend getting the bushings, if not now, definitely later after you install the SSP and realize it could still stand some firming up. :)

@jbarone

Just sent you a p/m as well, I ordered my rear motor mount and adjuster short shifter plate and it came with missing parts.... :indifferent:

PM Replied.

I guess I fail and should have pm'ed you prior to ordering. seems the price on the SSP with bushing and the rear mount is cheaper in this thread. Damn. good to know for future reference though. @jbarone

Interested in buying Stage 1, I already have a twm stage 2 short shifter kit. Can they be used together?