ATP 3076R

[WhoIsJeremy]

Go to IAG for that. They're the best place around for that kinda stuff

[Captain KR]

Originally Posted by WhoIsJeremy Go to IAG for that. They're the best place around for that kinda stuff

I was on there website and I saw there machinery. I also have a buddy with a subaru who swears by them. Seem like a group of good guys so I am going to set an appointment and go there.

[Captain KR]

MOAR POWA!!!! Finally received the turbo so now all I need is the cp-e stuff and I can get this show on the road.

[6oost3d]

Be sure to check the wastegate arm and flap. Make sure they're both nice and tight, you may need to preload it. I put the same turbo in my speed6 and even though everything seemed tight, the flap wasn't closing all the way and slow/no boost = no bueno. It'll save you the time of having to take the turbo out again to adjust anything.

Good luck with the build!

[Captain KR]

As I pull on the wastegate arm it flapper jiggles because there isnt any load on it but other than that it seats against the wastegate hole flush.

Originally Posted by 6oost3d Be sure to check the wastegate arm and flap. Make sure they're both nice and tight, you may need to preload it. I put the same turbo in my speed6 and even though everything seemed tight, the flap wasn't closing all the way and slow/no boost = no bueno. It'll save you the time of having to take the turbo out again to adjust anything. Good luck with the build!

oh and thanks for the tip

[WhoIsJeremy]

You bought a V-band downpipe, right? and you have the cp-e 4" turbo inlet, correct?

[Captain KR]

Originally Posted by WhoIsJeremy You bought a V-band downpipe, right? and you have the cp-e 4" turbo inlet, correct?

I have a v-band already and the cp-e 4 inch is on the way.

[WhoIsJeremy]

shoulda just went and picked up all of your cp-e parts from their shop. it's a good way to get to know people down there

[Captain KR]

Originally Posted by WhoIsJeremy shoulda just went and picked up all of your cp-e parts from their shop. it's a good way to get to know people down there

I thought about that shit to late the order had already been shipped.
Brain fart on my part.

[atvfreek]

Good Luck with the build man, that 3076 will pull nice!

[Captain KR]

Originally Posted by atvfreek Good Luck with the build man, that 3076 will pull nice!

I miss the long and drawn out spool-up feeling the k04 just spools to fast and doesnt have the bite that this turbo will have. I am just retarded excited to do this.

[Captain KR]

I am getting sick of waiting and i only have 2 parts left I am starting to get pissed off at cp-e freaking 45mins away from them and these are the last two things i need!!! GRRRR neways this is what i got in today

[Its2realj]

May i ask where did you get the civic windshield reservoir? I also got a cx Racing FMIC for my ms6, and need a windshield reservoir.

[irishking03]

Originally Posted by wdawson4 MOAR POWA!!!! Finally received the turbo so now all I need is the cp-e stuff and I can get this show on the road.

Looks like you are transferring k04 HP to the 3076 via Cellbrite. LOL.. Can I transfer to your store.

[Captain KR]

Originally Posted by Its2realj May i ask where did you get the civic windshield reservoir? I also got a cx Racing FMIC for my ms6, and need a windshield reservoir.

part number H370503 at www.carpartswholesale.com i hope that helps

Originally Posted by irishking03 Looks like you are transferring k04 HP to the 3076 via Cellbrite. LOL.. Can I transfer to your store.

Haha well since the ko4 isn't running effectively I am upgrading my services and hoping I get better reception.

[irishking03]

Originally Posted by wdawson4 part number H370503 at www.carpartswholesale.com i hope that helps Haha well since the ko4 isn't running effectively I am upgrading my services and hoping I get better reception.

LOL.. LMK what you make with the 3076.. Should be good numbers. I have a ms3 and I am hoping when I get the 3076 that I put like 450 down

[Captain KR]

Originally Posted by irishking03 LOL.. LMK what you make with the 3076.. Should be good numbers. I have a ms3 and I am hoping when I get the 3076 that I put like 450 down

god damn drivetrain loss is going to put me pretty far below that but i am going to get a D.O. meth kit and hopefully i reach high 300 low 400's

[irishking03]

Originally Posted by wdawson4 god damn drivetrain loss is going to put me pretty far below that but i am going to get a D.O. meth kit and hopefully i reach high 300 low 400's

Well you have that AWD so thats the killer right there especially off the line. Good Luck with the build. make sure you throw some pictures up.

[Captain KR]

Originally Posted by irishking03 Well you have that AWD so thats the killer right there especially off the line. Good Luck with the build. make sure you throw some pictures up.

i will bring my laptop and post as i go i haz store aircard lol

[irishking03]

Originally Posted by wdawson4 i will bring my laptop and post as i go i haz store aircard lol

That works. Unlimited Data is a Plus

[Captain KR]

Originally Posted by irishking03 That works. Unlimited Data is a Plus

The best part is I dont pay for it lol WINNING!!!

[dooderek]

hahahaha for a second i thought this was a fs thread.

+1 on buying a car with rightwheeldrive

[Captain KR]

Originally Posted by Derigo hahahaha for a second i thought this was a fs thread. +1 on buying a car with rightwheeldrive

Hearing you say that makes me realize it does look like a for sale thread

[Captain KR]

@Tormented
@WhoIsJeremy
@irishking03
@JP@edgeautosport.com

Fuck man, today was a busy ass day sigh ok so i went to IAG motorsports in westminster md to get my alignment done I was seriously impressed they loaded sandbags equivilent to my sexy 185 pounds in the car and after the alignment was done it drove even better than when i installed my eibachs. I also got my windows tinted.







While waiting I called jp at edge autosports and he went to bat for me calling cp-e and pretty much getting me my last two items so that I was able to drive up there and pick up my rmm and sri. I have to say all I will be doing business with jp again he is a stand up guy and I couldnt ask for better customer service. I am tired as fuck so none of this is getiing installed tonight I will be doing a nice install tomorrow. Hopefully I will be able to get the fmic, rmm, and both rear diff moints installed.

[JP@edgeautosport.com]

Pure awesomeness waiting to rip down the road! Thanks for the shout out Will, this looks like it'll be real fun, real soon.

[Downmented]

Thats interesting that they did the alignment with your added weight in the car. Did they corner weight it as well? That would be amazing. lol I am also curious why there is such a drastic different in camber between the front and rear.

[Captain KR]

Originally Posted by Tormented Thats interesting that they did the alignment with your added weight in the car. Did they corner weight it as well? That would be amazing. lol I am also curious why there is such a drastic different in camber between the front and rear.

they wanted to factor in my weight to the alignment which i think is extremely thorough

[Downmented]

I was saying that the weight addition is amazing. I completely agree with it, but is the camber always different like that ?

[Captain KR]

I couldn't tell you but hopefully someone will shine some light on that mystery I would think it would change based off of application and could vary based off of the difference in corner weight. But again I have no clue

[Downmented]

Originally Posted by wdawson4 I couldn't tell you but hopefully someone will shine some light on that mystery I would think it would change based off of application and could vary based off of the difference in corner weight. But again I have no clue

See, i know that corner weighting can be very complex. Im going to assume that it would vary based on application as well and dependent on your goal as well. But just like you, i also have no idea lol

[Captain KR]

Originally Posted by Tormented See, i know that corner weighting can be very complex. Im going to assume that it would vary based on application as well and dependent on your goal as well. But just like you, i also have no idea lol

Its def worht the 100 dollars man I will never get an alignment from anybody else as long as iI am in md

[irishking03]

Pictures look good. Keep them coming

[Captain KR]

Originally Posted by irishking03 Pictures look good. Keep them coming

Tomorrow there will most likely be a ton of pictures as long as everything goes good.

[WhoIsJeremy]

Hell yeah dude. @IAG Performance has def impressed me multiple times. Tomorrow will be fun dude! I'll def give you a should when I'm out from work. Can't wait to beat up on some unexpecting fools I already have a kill list started up haha

[Captain KR]

Originally Posted by WhoIsJeremy Hell yeah dude. @IAG Performance has def impressed me multiple times. Tomorrow will be fun dude! I'll def give you a should when I'm out from work. Can't wait to beat up on some unexpecting fools I already have a kill list started up haha

I am telling everyone it is a mazda 6 lol..... I didnt know ms6 come awd.... and I dont know how to race from a roll I only know how to race from 0 mph.

[WhoIsJeremy]

Originally Posted by wdawson4 I am telling everyone it is a mazda 6 lol..... I didnt know ms6 come awd.... and I dont know how to race from a roll I only know how to race from 0 mph.

I know a couple fags that will only roll race, but let me brake boost on their faggie ass! haha

[Captain KR]

No need for brake boosting lol I will argue until they give me a car length to spool up

[WhoIsJeremy]

stock turbo ms3 will jump enough on a bt ms6 for them to hurry up and hit the brakes and call it a win lol

[Captain KR]

Originally Posted by WhoIsJeremy stock turbo ms3 will jump enough on a bt ms6 for them to hurry up and hit the brakes and call it a win lol

well aint that a bitch brake boosting it is. other than that I kno 1 awd car that will rape off a roll I will bring him around one day so you can see some dsm love.

[WhoIsJeremy]

haha that's whats up! Who is doing your tuning and when you getting it done?