Meth Tank Interest

[Easter Bunny]

If you are concerned about the consequences in an accident run 50/50 mix.

[neganox]

Originally Posted by KCi Just an idea, the tank location (just behind the bumper) may be risky if involve in a nasty accident. It might be worst case scenario which it could ignite and blow up and whole engine is on flame. What about some crash bar or some reinforcement in front of the tank?

If your crumple zone is folded in that much to hit the tank, your car is probably totaled anyways. Plus this tank is probably much more durable than those 20 dollar plastic jobs that are normally in the same location.

[KCi]

Absolutely, HTP made tank is much more rigid than plastic version. And, because it is race car. LOL.

Time to get ditch the push-loc fittings to AN fittings.

[Matt@HTP]

Originally Posted by Easter Bunny If you are concerned about the consequences in an accident run 50/50 mix.

This is why all meth injection companies recommend a non flammable dilution.

[HBspeed]

Is it MS6 compatible?

[Matt@HTP]

Originally Posted by HBspeed Is it MS6 compatible?

There will be a MS6 version but it will require battery relocation to the trunk (we make a relocation kit).

[my2k13speed3]

What type of port/fitting is provided on the tank to connect to the pump?

[riflex]

Need this

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Matt@HTP]

Originally Posted by my2k13speed3 What type of port/fitting is provided on the tank to connect to the pump?

The outlet port is 1/4"npt fitting. This will allow you to run a 3/8" or -6an feed line to the pump.

[neganox]

I know what would make my new year happier.



Except with meth tanks and not imaginary dicks.

[Easter Bunny]

You would be just as happy with dicks admit it Fag.

[HTP]

Meth Tank Pre-Order information can be found right here.

[Code Monkey]

Let me clarify some things for Matt:

"For the MS6, we require a minimum of 2 pre-orders. The deadline is Wednesday, April 19, 2017. The introductory discounted price is $2,999.99"

[Matt@HTP]

Originally Posted by Code Monkey Let me clarify some things for Matt: "For the MS6, we require a minimum of 2 pre-orders. The deadline is Wednesday, April 19, 2017. The introductory discounted price is $2,999.99"

Funny thing is, our MS6 design is way easier to make, and I have more confidence that it will sell better than the MS3 tank. MS6 folks put their money where their mouths are. We will see how it plays out.

[Mazdazilla6]

Originally Posted by Matt@HTP Funny thing is, our MS6 design is way easier to make, and I have more confidence that it will sell better than the MS3 tank. MS6 folks put their money where their mouths are. We will see how it plays out.

Speaking of MS6, how bout that FMIC core?? *poke* *poke*

[neganox]

Ordered.

[MS3Shadow]

Would this support using >50 meth content?

And I'm ordering one as well.

sent from my Nexus 6P

[Matt@HTP]

Originally Posted by MS3Shadow Would this support using >50 meth content? And I'm ordering one as well. sent from my Nexus 6P

It does. I would not recommend running more than a 95% concentration of meth for it to be friendly with everything it passes through.

[Boost_creep]

Ordered.
Now to find a way to get a 3/8 NPT outlet on my Snow Performance pump.

[Matt@HTP]

Originally Posted by Boost_creep Ordered. Now to find a way to get a 3/8 NPT outlet on my Snow Performance pump.

If you have push connect fittings in an existing setup and you don't have the volume supply needs to the pump then something like this will work. 90 Deg Instant Fitting


Originally we had the outlet as 1/4" npt but have updated that to 3/8". Fittings to run it either way are more readily available as 3/8"npt.

[Boost_creep]

Originally Posted by Matt@HTP If you have push connect fittings in an existing setup and you don't have the volume supply needs to the pump then something like this will work. 90 Deg Instant Fitting Originally we had the outlet as 1/4" npt but have updated that to 3/8". Fittings to run it either way are more readily available as 3/8"npt.

That's perfect! Thanks!
Is there any way you can notify us of how many people have ordered (maybe a week or so before the pre-order ends)? I'll be curious as to if this comes to fruition or not. Lol

[riflex]

Ordered (:

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Matt@HTP]

Originally Posted by Boost_creep That's perfect! Thanks! Is there any way you can notify us of how many people have ordered (maybe a week or so before the pre-order ends)? I'll be curious as to if this comes to fruition or not. Lol

We will be starting another thread today that will have an updated count listed. We are ready to go on these as soon as we hit the goal.

[Jarods7920]

@Matt@HTP; Will soon be in production of unicorn tears. Another great product brought you by the folks of HTP. Way to go guys!

[my2k13speed3]

Does the credit card get charge immediately when you pre-order or will it be charged once the minimum of 15 pre-orders have been made?

[HTP]

Originally Posted by my2k13speed3 Does the credit card get charge immediately when you pre-order or will it be charged once the minimum of 15 pre-orders have been made?

Great question! Payment is due up front, at the time the pre-order is placed- so your credit card will be charged. In the event that the minimum is not met by the due date, all orders would be immediately refunded to the original payment method. At this rate however, I don't believe that will be a concern. As soon as we have 15 orders paid, we'll immediately be moving forward.

[foodtime]

Does the 15th person get a "special" prize?...maybe free shipping to alaska for <<<--- this guy

[neganox]

I should get a special cat tank. Make that happen HTP.

[Matt@HTP]

Originally Posted by neganox I should get a special cat tank. Make that happen HTP.

Shit, you and Katie bonded.

[neganox]

Originally Posted by Matt@HTP Shit, you and Katie bonded.

I bond with everyone. Sometimes it's called "docking".

[MD1032]

Originally Posted by Matt@HTP If you have push connect fittings in an existing setup and you don't have the volume supply needs to the pump then something like this will work. 90 Deg Instant Fitting Originally we had the outlet as 1/4" npt but have updated that to 3/8". Fittings to run it either way are more readily available as 3/8"npt.

I was able to find alternative sources for this fitting on Amazon.

Plastic:
http://www.amazon.com/dp/B009PT6VAU/

Nickel-plated brass:
http://www.amazon.com/dp/B009PTIW16/

The plastic one is slightly cheaper than the one from DO and looks like it's basically the same thing. The nickel-plated brass one is a little more expensive, but for a few more dollars I think I will order it instead so that I don't have to worry about longevity/durability.

[my2k13speed3]

How many have been purchased and how many are left?


Sent from my iPhone using Tapatalk

[MS3Shadow]

Originally Posted by my2k13speed3 How many have been purchased and how many are left? Sent from my iPhone using Tapatalk

He made another thread showing the count.
Official Meth Tank Pre-Order

sent from my Nexus 6P

[neganox]

AIS also carries all sorts of meth fittings. Swiveling stuff too which is most beneficial.