oem part numbers

[djuosnteisn]

Originally Posted by phillyb lol dustin, this thread has been here for almost a year...you're just seeing it?

Finally had a reason to look

[ispypsi]

Anyone got a PN for the bolt that holds the coil packs to the valve cover? I decapitated one.

If not, I'll probably just go thread pitch match it at Ace, but I really don't feel like trying to find where I put the top half, or extracting the bottom half yet to go do that

[phillyb]

take out one of the other ones...
but yeah, i'll see if i can find it.

[ms_3]

gotta get some ms6 wheels for my ms3

[brandonms3]

Hello im new to this forum.

teach me!!

thanks

Brandon

[phillyb]

whoa...weird...welcome to the site. make your own thread...

http://www.mazdaspeedforum.org/forum/foru...=newthread&f=8

[vbt101]

hey philly. any idea what the p/n is for 07 ms3 injector seals?

[RayRayBauder]

number 17 and 18 in this picture

[phillyb]

BN8P55210B - should come with the cover...#18

[cpolly69]

haha i need 4 wish somebody had it mf is over $200 at dealer
fail

[Dash08]

I want the red mazdaspeed decal that's on the passenger side of the dash of the 08.5-09 MS3's. The dealer wants $40 bucks for that fucking thing.

Knock off???

[phillyb]

hahahha. fuck that. i ain't even looking for that shit.
lol.
if you get the pn, look it up on onlinemazdaparts.com

[phillyb]

Originally Posted by vbt101 hey philly. any idea what the p/n is for 07 ms3 injector seals?

i know we had this conversation through pm...
if someone can tell me which part in this diagram we're talking about, i'll get you t3h pn.

[Liquidplatspeed6]

Does any one know what the correct part number is for the tail light assembly that fastens in to the rear quarter panel? I think that it is "2XL 950 100" because that is the only number that I can find on the damn thing and its written in the housing as well as on the perimeter of the lens...

I am trying to determine if this lens on eBay here ( 2006-2009 Mazda L ( Driver ) Tail Light: eBay Motors (item 220583213015 end time Jul-01-10 16:49:16 PDT) ) is the correct light.

Is sure as shit looks like it, but when I sent the seller a message, he said the lamp he had 2XL 950 160, but that he had to get up really close to see if it was a 100 or 160, but was certain it was a 6....

Can anyone verify if this is the right part number and if the light on eBay is the right one?

Or can you just sell me your tail light sitting in the garage collecting dust while your LED beam through the night?

Thanks guys!

[phillyb]

i looked for you earlier when we were in shout. good luck.

[crbalch]

hey philly, some moron hit my scraped and dented the shit out of my car (MS6) and i am going to need to get it replaced/painted. Any idea as to where I can find the part number for the rear quarter panel, possibly the rear bumper and rear passenger door panel?

thanks in advance..

[Alpha]

Does anyone know if the part numbers for the turbo studs and nuts include all 4 or are those numbers for a single stud/nut?

Thanks.

[phillyb]

Originally Posted by crbalch hey philly, some moron hit my scraped and dented the shit out of my car (MS6) and i am going to need to get it replaced/painted. Any idea as to where I can find the part number for the rear quarter panel, possibly the rear bumper and rear passenger door panel? thanks in advance..

every time i look for exterior parts, i can never find the correct pn.
i will look later though

Originally Posted by Alpha Does anyone know if the part numbers for the turbo studs and nuts include all 4 or are those numbers for a single stud/nut? Thanks.

individual nuts and studs.

[superskaterxes]

ms6 left(drivers) rear abs sensor - G21D4372YC

Originally Posted by crbalch hey philly, some moron hit my scraped and dented the shit out of my car (MS6) and i am going to need to get it replaced/painted. Any idea as to where I can find the part number for the rear quarter panel, possibly the rear bumper and rear passenger door panel? thanks in advance..

its a unibody, you aint replacing that

[Alpha]

Hey guys, do you know the part number for the CDFP bolt(s)? One of mine is stripped and I have to dremel it out and replace it.

Thanks!

[unklebenzy]

TY for this thread~! will be using this a lot!~

did i mention THANK YOU!!!

[xcoldricex]

tmic part number? where are you pulling them from now?

[phillyb]

L33X13565A

allmazda.net works again

[shpankey]

Great thread. ty op

[phillyb]

word

[wolly6973]

I need the p/n for the green clip that holds the valve cover breather hose on please...

[phillyb]

can't find that right now...i remember kevin needing the elbow coming off of the intake for that hose...i think you have to buy the breather hose altogether.

[wolly6973]

So you have a p/n for that assembly?

[phillyb]

we're talking about this guy...



here is the pn - L3K91374XB

[wolly6973]

Thanks philly,
Got one more...
How about the part that covers up the crash bar (the dark gray part on all genpu).

[phillyb]

oh shit, you know...
double check that part number, i can only find pns for gen1...idk why not genpu.

[rob ms6gt]

Philly,
Please add the following for when the 6 guys break their diff case:

CASE, COUPLING: #MA2727681, This is the front part of the diff case that the front diff mount bolts to.

BOLT: #H26034037A, This is the front diff mount bolt that always shears. (2 required)

BEARING: #996068206, This is the bearing inside of the coupling case.

OIL SEAL: #M05427165, This is the oil seal at the front of the case.

[theurgy]

Can anyone look up the part number for the energy-absorbing foam for the front bumper on a 1st Gen Speed3?

Long story short.. had a minor fender bender a couple weeks ago. Only damage appears to be the front bumper mustache (thanks for the part number) and the reinforcement foam underneath the bumper cover.
Do you guys know if it's the same for an MZ3 as a Speed3?
If so I'll source a part out from a wrecker for cheap (rear-ended write-offs FTW!)

[MZR165]

Getting my Turbo replaced by the dealer on my 07 MS6. Are the turbos for the MS3, CX-7 and MS6 the exact same part numbers? I had heard that there were some slight differences possibly in the trim sizes and other areas.

Thanks

[MS6FL]

From my understanding MS6 turbo and CX7 turbo have different part #s. As i had to check my work order to make sure they put in a MS6 KO4......

[djuosnteisn]

Yup, cx7 has a slightly smaller turbo.

[jeopardy98]

I'm looking for the part number on the genpu lower grille for the bumper. The smiley insert.

[802MS3]

OEM HID ballast/control module for 3, CX7, CX9

D530510H3

[MoKaP]

get me the vin and i will get you a part number and a price on that lower smiley grill

Matt

[802MS3]

anyone know the PN for the undertray clips and bolts?